.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Honda / Acura Cars > Civic/Del Sol
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 02-15-2002, 09:31 PM   #1
clemson33
 
Posts: n/a
Airbox Removal

Anybody have any guides or instructions on how to remove the stock airbox on a 5th Civic?

Thanks!
  Reply With Quote
Old 02-15-2002, 11:25 PM   #2
Whtehnda93DXSdn
It has 4 Doors...
 
Whtehnda93DXSdn's Avatar
 
Join Date: Nov 2001
Location: Fredericksburg,Va
Age: 49
Posts: 907
well if you look at it you will see how to take the top portion off easily but the tricky part is on the return that goes into the wheel well.

Basically undo the fender liner and once doing do you will have the rest of the access if I remember correctly.

Hope this might help a little..
__________________
Another good forum site:
Tuners Alliance
Whtehnda93DXSdn is offline   Reply With Quote
Old 02-16-2002, 01:43 PM   #3
clemson33
 
Posts: n/a
I do I go about taking off the fender liner? Do I need to re-attach it? Where does the AEM CAI filter sit?

Thanks!
  Reply With Quote
Old 02-16-2002, 05:00 PM   #4
SWIFT
 
Posts: n/a
It’s a lot easier to do it if you take off your wheel (pass side). Well first of all you need to take out the air filter box assembly at the top (loosen clamp at the throttle body, and remove 3 bolts at the filter box). Then go underneath your car and you’ll see a plastic bolt holding the lower fender liner... go up and you’ll see another plastic bolt holding the upper portion of it. You don’t have to take it off completely..
The resonator box is held by 2 or maybe 3 bolts.. and yes, you need to reinstall the fender liner.
  Reply With Quote
Old 02-17-2002, 02:38 PM   #5
clemson33
 
Posts: n/a
Does the filter on the AEM CAI sit below the liner or above it?

Thanks!
  Reply With Quote
Old 02-17-2002, 03:11 PM   #6
SWIFT
 
Posts: n/a
above it... the liner actually covers the filter so you need to reinstall it.
  Reply With Quote
Old 02-18-2002, 07:37 PM   #7
espionage
 
Posts: n/a
OK, I got it all out except for the "U" shaped part of the intake. It looks like there is just one bolt holding it, and I can get to it but it's a very awkward position. Any tips? Is there just 1 bolt?

Thanks!
  Reply With Quote
Old 02-18-2002, 08:44 PM   #8
SWIFT
 
Posts: n/a
you might wanna use a socket extension for that bolt..
  Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 01:05 PM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com