.:HSTuners::

02-20-2002, 08:42 AM

Ok! I have decided I wanted to mod my car but where do I start?
I already have an AEM long air intake. I really didn't notice any difference when I installed the intake. Should I go ahead and do the headers and exhaust? Or should I just wait till I drop that h22 or B18cR. But the engine swap probably won't happen till next year.

Your suggestions will and would be GREATLY appreciated.

4jacks · 02-20-2002, 08:47 AM

HMmmmmm (they need a better HMMMMmmmm face)

I wouldn't spend any money on the Old engine that won't fit on the new engine, Like I doubt Headers from the 1.6L will fit the 1.8L , but I think an Exhaust would be a safer bet. If your set on doing the swap I would save up the money for the swap, and make that your next mod, but if you wanna do some mods meantime, I would start w/ exhaust and then move on to suspension, or other things, as not to waste your money.

Hope it helps

02-20-2002, 08:54 AM

Any recommendations for exahust?

02-20-2002, 08:58 AM

Quote:

Originally posted by JunoMech
Any recommendations for exahust?

If your going with a swap, get something nice and quiet. A GReddy PE or Apex'i N1 would do the trick.

*Whtehnda93DXSdn* · 02-20-2002, 12:40 PM

I would say go for the exhaust but not headers if you are goin to do a swap as they will then just be sold to someone else or just sit inyoru garage/room..

You could do inexpensive mods like Plugs/wires and get a little spark goin on there..or maybe even a MSD ignition to go along for better spark and HP...

Hoep this might help...

02-21-2002, 06:11 PM

i have 2 gen4hb'. dont do anything to the engine. it is not worth it. JDMHONDAPARTS.COM has a b16a swap for $1250. and you can get the mouts and harnes for arround $500. That is what i suggest. sell the old engine and save 250. then you get the VTECH and DOHC and 160HP. you will not get the 160HP out the the d15. maybe even swap a ZC in but for the effort i would suggest the b16a. If it helps any theres my two pennies.

02-21-2002, 08:24 PM

Well I decided that my next mod would be suspension. I found some deals on the net for some Skunk2 coilovers and KYB AGX shocks for under $600. But I still have to get camber kits and then an allignment. Uhhhh, if aint't one thing it's another. Gotta love my Civic!

02-20-2002, 08:42 AM	#1
JunoMech Posts: n/a	Another question about DX mods Ok! I have decided I wanted to mod my car but where do I start? I already have an AEM long air intake. I really didn't notice any difference when I installed the intake. Should I go ahead and do the headers and exhaust? Or should I just wait till I drop that h22 or B18cR. But the engine swap probably won't happen till next year. Your suggestions will and would be GREATLY appreciated.

02-20-2002, 08:47 AM	#2
4jacks Registered User Join Date: Jan 2002 Location: Cecil County, Maryland Age: 44 Posts: 1,129	HMmmmmm (they need a better HMMMMmmmm face) I wouldn't spend any money on the Old engine that won't fit on the new engine, Like I doubt Headers from the 1.6L will fit the 1.8L , but I think an Exhaust would be a safer bet. If your set on doing the swap I would save up the money for the swap, and make that your next mod, but if you wanna do some mods meantime, I would start w/ exhaust and then move on to suspension, or other things, as not to waste your money. Hope it helps __________________ Patrick 4jacks 4jacks@gmail.com Happy Honda'ing

02-20-2002, 12:40 PM	#5
Whtehnda93DXSdn It has 4 Doors... Join Date: Nov 2001 Location: Fredericksburg,Va Age: 49 Posts: 907	I would say go for the exhaust but not headers if you are goin to do a swap as they will then just be sold to someone else or just sit inyoru garage/room.. You could do inexpensive mods like Plugs/wires and get a little spark goin on there..or maybe even a MSD ignition to go along for better spark and HP... Hoep this might help... __________________ Another good forum site: Tuners Alliance

02-21-2002, 06:11 PM	#6
littlered Posts: n/a	upgrades i have 2 gen4hb'. dont do anything to the engine. it is not worth it. JDMHONDAPARTS.COM has a b16a swap for $1250. and you can get the mouts and harnes for arround $500. That is what i suggest. sell the old engine and save 250. then you get the VTECH and DOHC and 160HP. you will not get the 160HP out the the d15. maybe even swap a ZC in but for the effort i would suggest the b16a. If it helps any theres my two pennies.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-20-2002, 08:54 AM	#3
JunoMech Posts: n/a	Any recommendations for exahust?

02-21-2002, 08:24 PM	#7
JunoMech Posts: n/a	Well I decided that my next mod would be suspension. I found some deals on the net for some Skunk2 coilovers and KYB AGX shocks for under $600. But I still have to get camber kits and then an allignment. Uhhhh, if aint't one thing it's another. Gotta love my Civic!