.:HSTuners::

01-23-2002, 11:04 PM

We're trying to get the error codes off of my friends Accord. We took off the kick panel and can see the diagnostic port. The service manual says to bridge the two sides with a wire or paper clip. The thing is, there are three holes! The picture in the book only shows two. And only speaks of two. Can anyone help us out?

Thanks,
Dave

ebpda9 · 01-24-2002, 01:36 AM

are you talking about trav-o's accord ? a 92 right ? i have only the 2 connectors. usually the plug is blue and for the first time it should be taped. It is inbetween the a pilar and the dash. you will need to shortcut the 2 extreme wires.

01-23-2002, 11:04 PM	#1
diligent_dave Posts: n/a	Pullin' them codes... We're trying to get the error codes off of my friends Accord. We took off the kick panel and can see the diagnostic port. The service manual says to bridge the two sides with a wire or paper clip. The thing is, there are three holes! The picture in the book only shows two. And only speaks of two. Can anyone help us out? Thanks, Dave

01-24-2002, 01:36 AM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	are you talking about trav-o's accord ? a 92 right ? i have only the 2 connectors. usually the plug is blue and for the first time it should be taped. It is inbetween the a pilar and the dash. you will need to shortcut the 2 extreme wires. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode