.:HSTuners::

02-03-2002, 10:13 PM

Hey guys,
I was just wondering what some of your 0-60 times were?
I was bored last night , and went out on wet snowy roads and tried some 0-60 times.
First try.......reved to 6K and let clutch slip...way too much wheel spin through first and about .5 seconds of wheelspin in second.- but got a 8.5 on that one
Second try I only let it spin at the top of first ( at about 6K it really started burning em ) anyway got it down to 7.0 seconds.
Third try almost no wheelspin through first gear, second gear I got about a second worth of spin in the shift, but my time was greatly improved! 6.5 seconds.
I can't wait to try this on Dry pavement! I think I might be able to get it down to 6 seconds.

02-03-2002, 10:25 PM

Mine's about 8.5 lol

94_AcCoRd_EX · 02-03-2002, 10:33 PM

On my g-tech, which isn't super accurate, I get around 8 flat. Sometimes a little higher, sometimes a little lower. Hopefully my clutch and new plugs will help that a little. I just use the g-tech as a comparison tool, because though it might not be super accurate, it is consistant.

02-03-2002, 10:36 PM

had my GF with me and she was using a stopwatch. Took her a few good tries to get it down but now I trust her with the times.

ebpda9 · 02-04-2002, 07:01 AM

Quote:

Originally posted by RxR_Eclipse
had my GF with me and she was using a stopwatch. Took her a few good tries to get it down but now I trust her with the times.

ooh i though somebody timed you with mississipis (sp ?)

i never tried to see what's mine but i think i can do under 6 seconds going down a ramp and the wind blowing from my rear

02-04-2002, 09:20 AM

My turbo timer does 0-60mph times so ill check it out as soooon as UPS gets here. Waiting for my rubber elbow. =/

slowEJ6 · 02-05-2002, 12:53 PM

Quote:

Originally posted by toykilla
My turbo timer does 0-60mph times so ill check it out as soooon as UPS gets here. Waiting for my rubber elbow. =/

i hate waiting on fedex/ups/usps.....it gets nerve wracking when you want somethin bad enough.

94_AcCoRd_EX · 02-05-2002, 01:37 PM

Quote:

Originally posted by hybrid3do0rcx

i hate waiting on fedex/ups/usps.....it gets nerve wracking when you want somethin bad enough.

Yeah, tell me about it. I was waiting for my clutch to arrive via fedex ground (slow as hell btw), and I checked the tracking on the net the day is was supposed to arrive. It said customer refused delivery, requests one week postponement. I called them and bitched them out, and they delivered it the next day. I have the worst luck with those things.

slowEJ6 · 02-05-2002, 02:18 PM

Quote:

Originally posted by 94_AcCoRd_EX
I have the worst luck with those things.

hehe trust me, no you dont. my stuff is stuck in Texas because dogs sniffed the package and so an agreement had to be signed so they can open the package....even though they already looked @ it before it was sent. makes no sense but oh well, i better be gettin my shit soon or else im gonna break someone off a lil somethin

94_AcCoRd_EX · 02-05-2002, 05:21 PM

Quote:

Originally posted by hybrid3do0rcx

hehe trust me, no you dont. my stuff is stuck in Texas because dogs sniffed the package and so an agreement had to be signed so they can open the package....even though they already looked @ it before it was sent. makes no sense but oh well, i better be gettin my shit soon or else im gonna break someone off a lil somethin

OK, your situation is much worse! :o

02-05-2002, 05:45 PM

Quote:

Originally posted by 94_AcCoRd_EX

I have the worst luck with those things.

HAHA, NONONO, I have the worst luck with these things. When I first bought my car I ordered, camber kit, stageIV clutch, N1 exhaust, a couple gauges, super-AFC and ****ing fed. ex. lost IT. I had to call nopi and to get NOPI to resend me my shit. That way I could get my shit sooner instead of going through a LONG LONG claim with fed ex, Nopi did. Nopi was really good about it. Once they called fed ex and found out what i told them they sent my shit right away via UPS and i got it all in 3 days.

02-05-2002, 09:09 PM

fedex is a bunch of idiots... they delivered parts of my computer to some 8 year old kid on the other side of town with a totally different name...

i brought out my can o' whoop ass... it's always open.

02-08-2002, 11:03 PM

i clocked myself today... 9.0 give or take a half second or so... im not a machine.

just an intake and premium gas (why use anything else?)

94_AcCoRd_EX · 02-09-2002, 12:51 AM

Its impossible to "clock" yourself by hand. A G-tech is consistant, though not super accurate, and going to a track is accurate. Other than that, you're just guessing.

02-09-2002, 12:54 AM

well i dont have a track really to go to...
i used a stopwatch but still thats not super accurate... i didnt say i was precise.

94_AcCoRd_EX · 02-09-2002, 01:04 AM

Quote:

Originally posted by Maxvla
well i dont have a track really to go to...
i used a stopwatch but still thats not super accurate... i didnt say i was precise.

I wasn't talking to you specifically, I was just saying that in general, that method isn't accurate. You can find a used g-tech for dirt cheap, so I'd recommend doing that if you really care about your times.

02-09-2002, 01:08 AM

newbie style Q... g-tech?

94_AcCoRd_EX · 02-09-2002, 01:10 AM

Quote:

Originally posted by Maxvla
newbie style Q... g-tech?

Performance meter
http://www.gtechpro.com/

They are fun to mess around with, and I got one used for under $50 I think.

02-09-2002, 01:14 AM

where'd you get yours? ebay?

slowEJ6 · 02-09-2002, 08:23 AM

sometimes those G-Techs are so off.....my friend with a Vortech'd mustang cobra was getting readouts of 800hp with it. and well....hes not even close to that number.

94_AcCoRd_EX · 02-09-2002, 12:31 PM

Quote:

Originally posted by hybrid3do0rcx
sometimes those G-Techs are so off.....my friend with a Vortech'd mustang cobra was getting readouts of 800hp with it. and well....hes not even close to that number.

The HP readings are shaky, so I don't even use them, but the times are consistent, and give you a good baseline to tell if your mods help at all.

Maxvla, I got it from a memeber of this site when it first started.

02-03-2002, 10:13 PM	#1
RxR_Eclipse Posts: n/a	0-60 times Hey guys, I was just wondering what some of your 0-60 times were? I was bored last night , and went out on wet snowy roads and tried some 0-60 times. First try.......reved to 6K and let clutch slip...way too much wheel spin through first and about .5 seconds of wheelspin in second.- but got a 8.5 on that one Second try I only let it spin at the top of first ( at about 6K it really started burning em ) anyway got it down to 7.0 seconds. Third try almost no wheelspin through first gear, second gear I got about a second worth of spin in the shift, but my time was greatly improved! 6.5 seconds. I can't wait to try this on Dry pavement! I think I might be able to get it down to 6 seconds.

02-03-2002, 10:33 PM	#3
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	On my g-tech, which isn't super accurate, I get around 8 flat. Sometimes a little higher, sometimes a little lower. Hopefully my clutch and new plugs will help that a little. I just use the g-tech as a comparison tool, because though it might not be super accurate, it is consistant. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

02-09-2002, 12:51 AM	#14
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	Its impossible to "clock" yourself by hand. A G-tech is consistant, though not super accurate, and going to a track is accurate. Other than that, you're just guessing. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-03-2002, 10:25 PM	#2
juvenile Posts: n/a	Mine's about 8.5 lol

02-03-2002, 10:36 PM	#4
RxR_Eclipse Posts: n/a	had my GF with me and she was using a stopwatch. Took her a few good tries to get it down but now I trust her with the times.

02-04-2002, 09:20 AM	#6
toykilla Posts: n/a	My turbo timer does 0-60mph times so ill check it out as soooon as UPS gets here. Waiting for my rubber elbow. =/

02-05-2002, 09:09 PM	#12
Maxvla Posts: n/a	fedex is a bunch of idiots... they delivered parts of my computer to some 8 year old kid on the other side of town with a totally different name... i brought out my can o' whoop ass... it's always open.

02-08-2002, 11:03 PM	#13
Maxvla Posts: n/a	i clocked myself today... 9.0 give or take a half second or so... im not a machine. just an intake and premium gas (why use anything else?)

02-09-2002, 12:54 AM	#15
Maxvla Posts: n/a	well i dont have a track really to go to... i used a stopwatch but still thats not super accurate... i didnt say i was precise.

02-09-2002, 01:08 AM	#17
Maxvla Posts: n/a	newbie style Q... g-tech?

02-09-2002, 01:14 AM	#19
Maxvla Posts: n/a	where'd you get yours? ebay?

02-09-2002, 08:23 AM	#20
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	sometimes those G-Techs are so off.....my friend with a Vortech'd mustang cobra was getting readouts of 800hp with it. and well....hes not even close to that number.