.:HSTuners::

02-02-2002, 08:24 PM

anyone know of how i can still pass smog if i change the camshats on a 01 lude??

does anybody know where i can find a S200 steering wheel w airbag other than at the dayam dealership that want 750 for it??

oh yeah...will S200 seats fit in the lude??

thans all

*ChrisCantSkate* · 02-02-2002, 10:50 PM

you can get a steering wheel from a s2000 that was totaled cause of rear or side impact i guess, same with seats, the seats will fit, you will just need to find brackets that will work with them. as far as smog pass, i am not sure about that, i dont have smog testing, maybe the cam shaft manufacure could answer some of your questions concerning emissions.

02-03-2002, 11:36 PM

thanks a lot!

*ChrisCantSkate* · 02-04-2002, 12:38 PM

no problem man, hope to see ya around.

ebpda9 · 02-04-2002, 01:02 PM

why do u want to change the camshafts on the car ? Do not mess with it yet. it's still performing at it's best since it's less than 2 years old.

Anyway if u decide to change the cams make sure you are gonna run lean during the day of the testing. my frien who works for e-chec told me that honda's have very small room to play with emissions. one wrong adjustement and your car won't pass. The are looking for carbon monoxide, and hidrocarburated fats comming out of your exhaust, so ru nning lean will avoid this problems.

02-12-2002, 07:52 AM

I assume that if you are going to change cams you want Crower or type S. The crower Stage I and Type S cams are the exact same and will pass smog. The crower stage II's with the stock idle lobe part number 63422A will pass also. The stage II's part number 63422 will probably not pass a smog test. The stage III's will definitely not pass smog. I hope this helps you....

02-14-2002, 01:09 AM

that helps a lot...thanks!

02-02-2002, 08:24 PM	#1
H22POWER Posts: n/a	Questions...help!! anyone know of how i can still pass smog if i change the camshats on a 01 lude?? does anybody know where i can find a S200 steering wheel w airbag other than at the dayam dealership that want 750 for it?? oh yeah...will S200 seats fit in the lude?? thans all

02-02-2002, 10:50 PM	#2
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	you can get a steering wheel from a s2000 that was totaled cause of rear or side impact i guess, same with seats, the seats will fit, you will just need to find brackets that will work with them. as far as smog pass, i am not sure about that, i dont have smog testing, maybe the cam shaft manufacure could answer some of your questions concerning emissions. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

02-04-2002, 12:38 PM	#4
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	no problem man, hope to see ya around. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

02-04-2002, 01:02 PM	#5
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	why do u want to change the camshafts on the car ? Do not mess with it yet. it's still performing at it's best since it's less than 2 years old. Anyway if u decide to change the cams make sure you are gonna run lean during the day of the testing. my frien who works for e-chec told me that honda's have very small room to play with emissions. one wrong adjustement and your car won't pass. The are looking for carbon monoxide, and hidrocarburated fats comming out of your exhaust, so ru nning lean will avoid this problems. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-12-2002, 07:52 AM	#6
97lude Posts: n/a	I assume that if you are going to change cams you want Crower or type S. The crower Stage I and Type S cams are the exact same and will pass smog. The crower stage II's with the stock idle lobe part number 63422A will pass also. The stage II's part number 63422 will probably not pass a smog test. The stage III's will definitely not pass smog. I hope this helps you....

02-14-2002, 01:09 AM	#7
H22POWER Posts: n/a	that helps a lot...thanks!