.:HSTuners::

sicones · 03-07-2005, 10:22 PM

well I thought about this tranny swap and Im just gonna do the whole engine swap to a jdm b16a 99-00 si, it hardly has any torque but it better then my d16 weedwacker
anybody know a place where I can get a reasonable price with good costumer service
I was thinking of either of these places:
http://www.jhpusa.com/
http://www.jspecautosports.com/
there pricey but they look respectable

sicones · 03-08-2005, 09:19 PM

anyone know any places...

ebpda9 · 03-08-2005, 09:37 PM

hmotorsonline.com i heard they are pretty reputable. plus i can get you usdm engines too, but i need to make a few calls first and they might be a bit more $$$

Jazn671 · 03-08-2005, 11:34 PM

*AzCivic* · 03-09-2005, 03:59 AM

personally, i'd try someplace local so if something is messed up you just drive right over and work things out instead of trying to do it over the phone and then probably having to wait for the mail again, lots of times they offer warranties too. try looking in the back of your local autotrader.

*pdiggitydogg* · 03-09-2005, 08:34 AM

Check local if you can, sometimes you'll get a good deal and sometimes you'll get totally dicked over (like here).
If that doesnt work out and you want to stick usdm, buy from ImportAutoSalvage.com. Even if their website doesnt say they have something, chances are they do anyways.
But if you want to go jdm, buy from Hmotorsonline.com or totaljdm.com. Both are reputable and both have decent/fair pricing.

thermal · 03-09-2005, 08:17 PM

If you were local, I would've gotten you a swap already

sicones · 03-10-2005, 10:32 AM

whats do different about a jdm motor and a usdm

thermal · 03-10-2005, 04:17 PM

JDM has a little bit more power through either cam duration, porting/polish job, emission restriction, ECU, etc...

sicones · 03-10-2005, 09:24 PM

I asked a performace shop around here today they wanted $2500 for a complete b16 swap, i asked him what year it came from how many miles and is it obd2, he said i dont know, i dont know, and theres only obd1 in japan, so there goes that place.

to bad though they got great prices my brother just got a tein ss kit for $850

Jazn671 · 03-10-2005, 11:58 PM

seeing as your car is a 2000 ex, you're not going to find much b16 2000 or newer... so... you're going to have to cheat a little. i know it's illegal to swap in for instance a '92 jdm b16.... but you can do it illegally but somewhat legal. a lot of people have ek chassis and run integra xsi b16's and are still obd2 compliant. if you ask the shop about it, they should be able to pull it off. depending on which ecu you use will determine how much work needs to be done.

hmong_r · 03-11-2005, 07:42 AM

I always go to the Junk first.. lol

sicones · 03-11-2005, 12:05 PM

I not to worred about it being legal I can get inspections done without a problem, its just that putting a 10-12 year old engine in my car does'nt sound good to me, I want a newer obd2 eninge at least from a 96+

*pdiggitydogg* · 03-11-2005, 12:59 PM

Japan has super strict smog laws, thats why there are engines for us here. It is not uncommon for a car in japan to be junked all together after only several years. Therefore, ngines such as the b16a, dont have as many miles as you may suspect.
Plus, most of japan is close, so the people dont drive very far.

Jazn671 · 03-11-2005, 07:44 PM

i agree... and i just got back from japan... if i lived there, i probably wouldn't drive... traffic there is all f*cked up.

thermal · 03-11-2005, 08:30 PM

dude, it doesnt matter what OBD it is man. you can cross over any B-engine. if you think about it, you will mostlikely use your current harness anyway. You will have to convert some of the wires but that about it.......

I do get your point tho. You want an OBD2 engine to justify it being newer.

03-07-2005, 10:22 PM	#1
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	buying an engine well I thought about this tranny swap and Im just gonna do the whole engine swap to a jdm b16a 99-00 si, it hardly has any torque but it better then my d16 weedwacker anybody know a place where I can get a reasonable price with good costumer service I was thinking of either of these places: http://www.jhpusa.com/ http://www.jspecautosports.com/ there pricey but they look respectable Last edited by sicones : 03-07-2005 at 10:25 PM.

03-08-2005, 09:37 PM	#3
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	hmotorsonline.com i heard they are pretty reputable. plus i can get you usdm engines too, but i need to make a few calls first and they might be a bit more $$$ __________________

03-08-2005, 11:34 PM	#4
Jazn671 1st Gear Join Date: Dec 2002 Location: Illinois Age: 44 Posts: 74	HMO __________________ Suja 1 Motoring 502 E St. Charles Carol Stream, IL 60188 630-407-0711 www.suja1.com AIM:Jazn671

03-09-2005, 08:17 PM	#7
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	If you were local, I would've gotten you a swap already __________________ Project Teg Visit the Turbo Forum

03-10-2005, 04:17 PM	#9
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	JDM has a little bit more power through either cam duration, porting/polish job, emission restriction, ECU, etc... __________________ Project Teg Visit the Turbo Forum

03-08-2005, 09:19 PM	#2
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	anyone know any places...

03-09-2005, 03:59 AM	#5
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	personally, i'd try someplace local so if something is messed up you just drive right over and work things out instead of trying to do it over the phone and then probably having to wait for the mail again, lots of times they offer warranties too. try looking in the back of your local autotrader.

03-09-2005, 08:34 AM	#6
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Check local if you can, sometimes you'll get a good deal and sometimes you'll get totally dicked over (like here). If that doesnt work out and you want to stick usdm, buy from ImportAutoSalvage.com. Even if their website doesnt say they have something, chances are they do anyways. But if you want to go jdm, buy from Hmotorsonline.com or totaljdm.com. Both are reputable and both have decent/fair pricing.

03-10-2005, 10:32 AM	#8
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	whats do different about a jdm motor and a usdm

03-10-2005, 09:24 PM	#10
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	I asked a performace shop around here today they wanted $2500 for a complete b16 swap, i asked him what year it came from how many miles and is it obd2, he said i dont know, i dont know, and theres only obd1 in japan, so there goes that place. to bad though they got great prices my brother just got a tein ss kit for $850

03-10-2005, 11:58 PM	#11
Jazn671 1st Gear Join Date: Dec 2002 Location: Illinois Age: 44 Posts: 74	seeing as your car is a 2000 ex, you're not going to find much b16 2000 or newer... so... you're going to have to cheat a little. i know it's illegal to swap in for instance a '92 jdm b16.... but you can do it illegally but somewhat legal. a lot of people have ek chassis and run integra xsi b16's and are still obd2 compliant. if you ask the shop about it, they should be able to pull it off. depending on which ecu you use will determine how much work needs to be done. __________________ Suja 1 Motoring 502 E St. Charles Carol Stream, IL 60188 630-407-0711 www.suja1.com AIM:Jazn671

03-11-2005, 07:42 AM	#12
hmong_r Parked Join Date: Mar 2005 Location: Alaska Age: 41 Posts: 2	I always go to the Junk first.. lol

03-11-2005, 12:05 PM	#13
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	I not to worred about it being legal I can get inspections done without a problem, its just that putting a 10-12 year old engine in my car does'nt sound good to me, I want a newer obd2 eninge at least from a 96+

03-11-2005, 12:59 PM	#14
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Japan has super strict smog laws, thats why there are engines for us here. It is not uncommon for a car in japan to be junked all together after only several years. Therefore, ngines such as the b16a, dont have as many miles as you may suspect. Plus, most of japan is close, so the people dont drive very far.

03-11-2005, 07:44 PM	#15
Jazn671 1st Gear Join Date: Dec 2002 Location: Illinois Age: 44 Posts: 74	i agree... and i just got back from japan... if i lived there, i probably wouldn't drive... traffic there is all f*cked up. __________________ Suja 1 Motoring 502 E St. Charles Carol Stream, IL 60188 630-407-0711 www.suja1.com AIM:Jazn671

03-11-2005, 08:30 PM	#16
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	dude, it doesnt matter what OBD it is man. you can cross over any B-engine. if you think about it, you will mostlikely use your current harness anyway. You will have to convert some of the wires but that about it....... I do get your point tho. You want an OBD2 engine to justify it being newer. __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode