.:HSTuners::::Hondas Wanted:: |
05-02-2003, 11:45 AM
|
#1 |
|
Posts: n/a
|
ls/vtec
for the ls/vtec setup will it be possible to use the b20 block with the b16a head?
|
|
|
05-02-2003, 01:22 PM
|
#2 |
|
4th Gear
Join Date: Aug 2001
Location: Boulder, CO
Age: 43
Posts: 830
|
yes- AKA CR-VTEC.
Equivalent to a bored out LS/VTEC. |
|
|
|
05-03-2003, 05:24 PM
|
#3 |
|
Posts: n/a
|
ok so then i can use a b20 block on my b16 motor and does any one know how it will run after the setup is complete?
|
|
|
|
05-07-2003, 11:25 PM
|
#4 |
|
4th Gear
Join Date: Aug 2001
Location: Boulder, CO
Age: 43
Posts: 830
|
Well, it's a little more complicated than that, but you should only rev it to 6800 rpm.
LS/VTEC and CR-VTEC suck. |
|
|
|
|
05-10-2003, 01:06 PM
|
#5 |
|
Posts: n/a
|
yeah 2ndGen is really anti LS/VTEC and its a really iffy setup, and requires a lot of maintenance, really more trouble than its worth, just run boost
|
|
|
|
05-10-2003, 03:28 PM
|
#6 | |
|
Registered User
Join Date: Dec 2002
Location: so cali again
Age: 42
Posts: 820
|
Quote:
second that. if done properly and maintained religously, it's a good setup that will create good power, but it just isn't worth the time, effort, and money unless you have a gearhead who likes to work on motors everyday living near you.
__________________
Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com 
|
|
|
|
|
|
06-02-2003, 08:25 PM
|
#7 |
|
6th Gear
Join Date: Jan 2003
Location: Cleveland, OH
Age: 37
Posts: 1,974
|
yeah i heard it was pretty high maintanance. if you want power get a turbo or boost.
__________________
SHIFT_MyNuts Some people call it an obsession I just call it my maxima 1997 Maxima SE 5spd, Stillen Body Kit, Warpspeed Y & B pipes, Magnaflow Muffler, Koni Yellows & Tein S-tech springs, JVC Headunit, Directed 7" in dash screen,Stillen Intake, red/clear tail lights, AE mod, Paceseter STS, EL-Glow Gauges, Clutchmasters FX300 Clutch, rebuilt tranny, 19" Mille Miglia Evo 5's with Pirelli Pzero's(summer), 18" Hp D-10 hyper silver wrapped in Goodyear ultra HPR, SPW front strut bar, Helios 7000k HID, Motostorm UDP, Viper 5000Vx alarm, 2 12" PowerClass 124 subs, Kenwood 1200 Watt amp, DVD Changer |
|
|
|
|
06-29-2003, 10:04 AM
|
#8 |
|
Posts: n/a
|
I have got a buddy that did the cr-vtec swap and has not had a problem with it. He runs mid 14's. He told me that the swap is pretty basic and the that the block and head bolt right on. The engine was placed into a crx. Website:
www.kaizen-group.pair.com This site is the Central Interior Tuning Club of Prince George, B.C. |
|
|
|
07-01-2003, 07:04 PM
|
#9 |
|
4th Gear
Join Date: Aug 2001
Location: Boulder, CO
Age: 43
Posts: 830
|
A GS-R engine will run mid-14s in a CRX.
It's a little more complicated than slapping a head on a block. Regardless, the rod ratio for LS/VTEC ensures it will never last as long as a GS-R, especially when revved to an effective VTEC redline. In additon, the non-VTEC crank was never made to support high RPMs. Do yourself a favor: save some time, effort, and money, and just get a B18C. |
|
|
|
|
07-01-2003, 09:34 PM
|
#10 |
|
Posts: n/a
|
Just tellin' my experiences, but 2nd gen teg has got a point
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
