.:HSTuners::

08-20-2002, 09:21 AM

...from the 115 mph speed limiter. What's the best way to remove the limiter on an obd I honda?

*KwikR6* · 08-20-2002, 12:18 PM

I've never removed a rev limiter on a car before so I don't know.
Why do you wanna do that?
I'm goign to move this to the high performance....not many people check in the Del Sol Forum...
Oh by the way
Got pics of the little del sol for me...I'm obsessed with them.

Accord Man · 08-20-2002, 12:25 PM

you'll have to modifythe ECU, replace the ECU, or add a piggy-back system that'll override the ECU.

You probably understand that the problem lays in the ECU!

08-20-2002, 11:40 PM

No, no photos yet. I bought it Saturday and do not have a digicam.

I knew it was the ecu, just wanted to know if anyone around here has done it. I race at the drgstrips around me and 115 mph is fine for them. But there is a road course near where 115 is not so good. Is there a JET chip that heightens or removes it? I checked out hondata but they say nothing of the speed limiter. Do JDM ecu's have limiters?

Many thanks to anyone who tackles my questions. I've been around since January so I *know* most of ya. lol

08-21-2002, 10:06 AM

Due to my (I guess) not so keen reading ability I overlooked some info on the hondata site. lol They do remove the speed limiter. One of the dealer/tuners for them is in my area too. It's a lot of cash though. Probably doesn't include the dyno time either. Oh well, what ya gonna do...

Accord Man · 08-21-2002, 10:21 AM

try and find another chip..
I dont know who makes chips for your car..
Ask around..

*KwikR6* · 08-21-2002, 01:35 PM

Quote:

Originally posted by Accord Man
try and find another chip..
I dont know who makes chips for your car..
Ask around..

That's all you kould do...or just bite the bullet and spend the money on the hondata

08-21-2002, 09:31 PM

I believe JET makes a chip for the b16 but I'm not a fan of their products. I'll just have to save up for the hondata. I reckon.

Accord Man · 08-21-2002, 09:36 PM

Quote:

Originally posted by diligent_dave
I believe JET makes a chip for the b16 but I'm not a fan of their products. I'll just have to save up for the hondata. I reckon.

why??

had any bad experiences with them?

08-22-2002, 09:08 AM

Well, the jet chips advance the timing for one. So in the future whether I go forced induction or nitrous I will have to remove it. Advanced timing is a no no with them.

Second, my dodge dakota guys have never really seen much gains from the JET chips. Not sure if it's the same with the hondas.

Number one is my main reason.

ebpda9 · 08-23-2002, 08:38 PM

what happened to the dakota ? seriously i never heard anything about chips

08-23-2002, 11:37 PM

Still have the dak. But it was being unreliable so I bought a honda. lol Hey! I can beat you now! In a race anyway... lmao

08-29-2002, 08:50 AM

Ever felt like a total tool? hahaha I found me a stretch of backroad between some cow pastures. I live in Texas, what'd ya expect? lol And did some high speed runs. The 115 mph speed limiter is only in 4th gear!?! When I shift the thing into 5th right at 114 or so I can go well above 120.

I still am not used to this thing. Cra-Z Honda... Thanks everybody.

ebpda9 · 08-29-2002, 10:52 AM

you must have a very optimistic speedometer

that's weird with the limiter in the fourth. maybe you are running out of gear or something like that.

*KwikR6* · 08-29-2002, 12:51 PM

Depends also on your fuel cut off point...might cut off in 4th going that fast.

2ndGenTeg · 08-29-2002, 05:51 PM

My buddy had his CRX ECU JETted, and it did absolutely zero good. And with an intake, header, exhaust, and JRSC, he should have seen something.

Hondata is definitely the best. If you're like me and don't wanna spend the coin for Hondata, look into the ECU mods at jdmhondaparts.com- not bad at all.

09-16-2002, 04:31 PM

Check with skunk2 they make some qaullity products.....My boy can rechip ecus with the skunk2 style chip for a hundred bucks....I dont know what the rev limiter will hit but I know it increases it and also the fuel and I also understand it will open up vtech sooner....But I would definetlly NOT recomend taking out your rev limmiter ....Big NO NO....You can do it but if you end up going to high you better be ready to empty that piggy bank.......But definetlly check out skunk2 chips....
Good luck
TY

delsolvtec · 09-17-2002, 10:51 PM

my del sol pegs 120+ in 5th gear too.

*ChrisCantSkate* · 09-18-2002, 12:39 AM

find someone who can hack a b16 ecu... it shouldnt cost much to just get the speed limiter removed

OT: my preludes speed limiter is the top of 5th gear! i hit 135 with a few rpms still to go. it SEEMED 145-150 was possible.

10-11-2002, 12:19 AM

so, you have a speed limiter at 115 in 4th, but if you shift it goes beyond that speed? doesnt seem like a speed limiter.

08-20-2002, 09:21 AM	#1
diligent_dave Posts: n/a	free my sol... ...from the 115 mph speed limiter. What's the best way to remove the limiter on an obd I honda?

08-20-2002, 12:18 PM	#2
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 44 Posts: 8,871	I've never removed a rev limiter on a car before so I don't know. Why do you wanna do that? I'm goign to move this to the high performance....not many people check in the Del Sol Forum... Oh by the way Got pics of the little del sol for me...I'm obsessed with them. __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

08-20-2002, 12:25 PM	#3
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	you'll have to modifythe ECU, replace the ECU, or add a piggy-back system that'll override the ECU. You probably understand that the problem lays in the ECU! __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

08-21-2002, 10:21 AM	#6
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	try and find another chip.. I dont know who makes chips for your car.. Ask around.. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

08-23-2002, 08:38 PM	#11
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	what happened to the dakota ? seriously i never heard anything about chips __________________

08-20-2002, 11:40 PM	#4
diligent_dave Posts: n/a	No, no photos yet. I bought it Saturday and do not have a digicam. I knew it was the ecu, just wanted to know if anyone around here has done it. I race at the drgstrips around me and 115 mph is fine for them. But there is a road course near where 115 is not so good. Is there a JET chip that heightens or removes it? I checked out hondata but they say nothing of the speed limiter. Do JDM ecu's have limiters? Many thanks to anyone who tackles my questions. I've been around since January so I know most of ya. lol

08-21-2002, 10:06 AM	#5
diligent_dave Posts: n/a	Due to my (I guess) not so keen reading ability I overlooked some info on the hondata site. lol They do remove the speed limiter. One of the dealer/tuners for them is in my area too. It's a lot of cash though. Probably doesn't include the dyno time either. Oh well, what ya gonna do...

08-21-2002, 09:31 PM	#8
diligent_dave Posts: n/a	I believe JET makes a chip for the b16 but I'm not a fan of their products. I'll just have to save up for the hondata. I reckon.

08-22-2002, 09:08 AM	#10
diligent_dave Posts: n/a	Well, the jet chips advance the timing for one. So in the future whether I go forced induction or nitrous I will have to remove it. Advanced timing is a no no with them. Second, my dodge dakota guys have never really seen much gains from the JET chips. Not sure if it's the same with the hondas. Number one is my main reason.

08-23-2002, 11:37 PM	#12
diligent_dave Posts: n/a	Still have the dak. But it was being unreliable so I bought a honda. lol Hey! I can beat you now! In a race anyway... lmao

08-29-2002, 08:50 AM	#13
diligent_dave Posts: n/a	Ever felt like a total tool? hahaha I found me a stretch of backroad between some cow pastures. I live in Texas, what'd ya expect? lol And did some high speed runs. The 115 mph speed limiter is only in 4th gear!?! When I shift the thing into 5th right at 114 or so I can go well above 120. I still am not used to this thing. Cra-Z Honda... Thanks everybody.

08-29-2002, 10:52 AM	#14
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	you must have a very optimistic speedometer that's weird with the limiter in the fourth. maybe you are running out of gear or something like that. __________________

08-29-2002, 12:51 PM	#15
KwikR6 Mind Blowing Join Date: Oct 2001 Location: Cloud 69 Age: 44 Posts: 8,871	Depends also on your fuel cut off point...might cut off in 4th going that fast. __________________ I JDM. I My Honda The epitome of stupidity is expressed so fluidly with the shity lyric theory you try to spit at me. I CAN'T WAIT FOR SUMMER!!!

08-29-2002, 05:51 PM	#16
2ndGenTeg 4th Gear Join Date: Aug 2001 Location: Boulder, CO Age: 43 Posts: 830	My buddy had his CRX ECU JETted, and it did absolutely zero good. And with an intake, header, exhaust, and JRSC, he should have seen something. Hondata is definitely the best. If you're like me and don't wanna spend the coin for Hondata, look into the ECU mods at jdmhondaparts.com- not bad at all.

09-16-2002, 04:31 PM	#17
crxb16hybrid Posts: n/a	Check with skunk2 they make some qaullity products.....My boy can rechip ecus with the skunk2 style chip for a hundred bucks....I dont know what the rev limiter will hit but I know it increases it and also the fuel and I also understand it will open up vtech sooner....But I would definetlly NOT recomend taking out your rev limmiter ....Big NO NO....You can do it but if you end up going to high you better be ready to empty that piggy bank.......But definetlly check out skunk2 chips.... Good luck TY

09-17-2002, 10:51 PM	#18
delsolvtec Del Sol Forum Moderator Join Date: Aug 2002 Location: West Chicago IL Age: 48 Posts: 594	my del sol pegs 120+ in 5th gear too. __________________ 1994 Mazda MX6 - For Sale 1995 Civic Hatch - Coming Soon

09-18-2002, 12:39 AM	#19
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	find someone who can hack a b16 ecu... it shouldnt cost much to just get the speed limiter removed OT: my preludes speed limiter is the top of 5th gear! i hit 135 with a few rpms still to go. it SEEMED 145-150 was possible. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

10-11-2002, 12:19 AM	#20
monkut Posts: n/a	so, you have a speed limiter at 115 in 4th, but if you shift it goes beyond that speed? doesnt seem like a speed limiter.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode