.:HSTuners::

97CivicBoy · 03-03-2003, 10:26 PM

I WANNA REMOVE THE CIVIC EMBLEM AND THE LX EMBLEM FROM THE BACK BUMPER...I'VE SEEN THIS DONE BEFORE..HOW DO U DO THIS...THANX

94_AcCoRd_EX · 03-03-2003, 10:32 PM

This forum is for completed step by step instructions only. I'll move this to the exterior forum...

03-04-2003, 08:08 AM

i heard of ppl using heat guns, hair dryers but im not quite sure how to remove it i know that once it is off u can use goo gone to remove the residue

slowEJ6 · 03-04-2003, 05:10 PM

if you remove the H emblem, you are going to have holes in your trunk.

just use a hair dryer and pry off the LX emblem. then use some goo gone or watered down degreaser and rub off the rest of the goop, then wash the area with some water that you just degreased.

03-04-2003, 08:46 PM

yea removing the LX is easy just use hair dryer and make sure all that sticky crap comes off! and the emblem is easy too but i'm not sure how to do it......

97CivicBoy · 03-05-2003, 09:16 PM

yeh i jus took off the lx and the civic emblems....there is so much residue left...u can still see the outline of the civic...what do i do to get rid of it..it looksl ike crap

slowEJ6 · 03-06-2003, 01:56 PM

got a buffer?
wash your car and just give the whole thing a go over with some polishing and then a nice wax job - should restore the bling bling to any faded areas and make it so you cant see the LX thing anymore.

03-06-2003, 07:24 PM

Quote:

Originally posted by 97CivicBoy
yeh i jus took off the lx and the civic emblems....there is so much residue left...u can still see the outline of the civic...what do i do to get rid of it..it looksl ike crap

i removed my DX ....it's so clear u can't tell anything was ever there...

blind34_1 · 03-06-2003, 10:55 PM

so are you going to shave the holes or just leave them there? or are you sticking some rice in its place?

03-31-2003, 01:06 AM

When I got my car, all of that stuff was already gone. Lucky me.

04-01-2003, 12:51 PM

A T shirt or rag and a flat head screw driver always do the trick.

And some Goo Gone

03-03-2003, 10:26 PM	#1
97CivicBoy Registered User Join Date: Dec 2002 Location: nj Posts: 398	How Do U Do This???? Help I WANNA REMOVE THE CIVIC EMBLEM AND THE LX EMBLEM FROM THE BACK BUMPER...I'VE SEEN THIS DONE BEFORE..HOW DO U DO THIS...THANX

03-03-2003, 10:32 PM	#2
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 43 Posts: 11,142	This forum is for completed step by step instructions only. I'll move this to the exterior forum... __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-04-2003, 08:08 AM	#3
JamieS697 Posts: n/a	i heard of ppl using heat guns, hair dryers but im not quite sure how to remove it i know that once it is off u can use goo gone to remove the residue

03-04-2003, 05:10 PM	#4
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	if you remove the H emblem, you are going to have holes in your trunk. just use a hair dryer and pry off the LX emblem. then use some goo gone or watered down degreaser and rub off the rest of the goop, then wash the area with some water that you just degreased.

03-04-2003, 08:46 PM	#5
Civic98 Posts: n/a	yea removing the LX is easy just use hair dryer and make sure all that sticky crap comes off! and the emblem is easy too but i'm not sure how to do it......

03-05-2003, 09:16 PM	#6
97CivicBoy Registered User Join Date: Dec 2002 Location: nj Posts: 398	yeh i jus took off the lx and the civic emblems....there is so much residue left...u can still see the outline of the civic...what do i do to get rid of it..it looksl ike crap

03-06-2003, 01:56 PM	#7
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 42 Posts: 3,195	got a buffer? wash your car and just give the whole thing a go over with some polishing and then a nice wax job - should restore the bling bling to any faded areas and make it so you cant see the LX thing anymore.

03-06-2003, 10:55 PM	#9
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 39 Posts: 1,813	so are you going to shave the holes or just leave them there? or are you sticking some rice in its place?

03-31-2003, 01:06 AM	#10
maikoshi Posts: n/a	When I got my car, all of that stuff was already gone. Lucky me.

04-01-2003, 12:51 PM	#11
SolPol Posts: n/a	A T shirt or rag and a flat head screw driver always do the trick. And some Goo Gone