.:HSTuners::

03-14-2004, 04:59 PM

Has anyone installed a oil pressure gauge? I have one for my 94 honda accord with a 1.6L and was wondering where to install the sender on the head?

Thanks

*pdiggitydogg* · 03-14-2004, 05:42 PM

on the oil pressure sensor on the back of the block
(near the filter)

thermal · 03-14-2004, 08:55 PM

or get a block adapter which is less hassle. Read my thread on this post:
http://www.hstuners.com/forums/showt...102#post215102

ebpda9 · 03-14-2004, 09:00 PM

well dude i dunno what i am missing here but i didn't see an accord with a 1.6l engine yet ? they might be in europe or japan but not in the us. all the 94 models have a 2.2l engine. as for your question i'd say use the "T" method.

it should be right above the oil filter, andunder the head. it is a biatch to work on it tho

*pdiggitydogg* · 03-14-2004, 09:06 PM

Ive seen several people who connect a steel flex line at the spot and then T it off at the fire wall for easier connections.
But yes...the sandwich adapters seem to be the best

03-14-2004, 09:18 PM

did ya swap in that 1.6?... sure hope not

03-14-2004, 04:59 PM	#1
accordmaniac Posts: n/a	oil pressure gauge question Has anyone installed a oil pressure gauge? I have one for my 94 honda accord with a 1.6L and was wondering where to install the sender on the head? Thanks

03-14-2004, 08:55 PM	#3
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	or get a block adapter which is less hassle. Read my thread on this post: http://www.hstuners.com/forums/showt...102#post215102 __________________ Project Teg Visit the Turbo Forum

03-14-2004, 09:00 PM	#4
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	well dude i dunno what i am missing here but i didn't see an accord with a 1.6l engine yet ? they might be in europe or japan but not in the us. all the 94 models have a 2.2l engine. as for your question i'd say use the "T" method. it should be right above the oil filter, andunder the head. it is a biatch to work on it tho __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-14-2004, 05:42 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	on the oil pressure sensor on the back of the block (near the filter)

03-14-2004, 09:06 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Ive seen several people who connect a steel flex line at the spot and then T it off at the fire wall for easier connections. But yes...the sandwich adapters seem to be the best

03-14-2004, 09:18 PM	#6
Mirkwo0dForest Posts: n/a	did ya swap in that 1.6?... sure hope not