.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Honda / Acura Cars > Civic/Del Sol
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 02-18-2006, 09:50 PM   #1
ewaugh
Registered User
 
Join Date: Jun 2004
Location: AL
Posts: 86
Zc

After blowing a transmission I ended up with a ZC transmission to replace it. The only problem with that is there are very few axle's that will work with this trans. So, if anyone has a Drivers side ZC axle laying around, or know anyone that does, let me know. the_evan at earthlink . net.

ewaugh
__________________
"Drive Carefully: 90% of all people are caused by accidents"

ewaugh is offline   Reply With Quote
Old 02-20-2006, 02:57 PM   #2
pdiggitydogg
Yahoo Watashi wa kattaze!
 
pdiggitydogg's Avatar
 
Join Date: May 2002
Location: Meanwhile, up in The D...
Age: 40
Posts: 10,579
http://www.enginereplacement.com/htd...vic_crx_zc.htm
Quote:
If you are useing your stock transmission or any other US L3 transmission your stock axles will work. For Japanese ZC transmissions use ZC intermediate shaft and two right hand axles from your model car with 90-93 Integra inner joints. 90-93 Integra axles can be modified to work also. If your car is either a CRX HF, or Civic Standard model you will also need to replace the knuckles and hubs from any other Civic or CRX model to use the modified 90-93 Integra axles.
Ever thought about using the OG tranny?
pdiggitydogg is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 12:08 AM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com