.:HSTuners::

sicones · 07-28-2005, 09:19 AM

ok me and my brother are both swaping our cars to manual , besides that we both bought 2 manual trannys, and the input shaft on my brothers tranny wiggles like a mofo, and mine does not at all, is that really bad or should he get it rebuilt, we talked to this tranny guy and he said that its not worth rebuilding untill you at least drive with it, what do you think

AkimboStylee · 07-28-2005, 10:54 AM

there should be minimal play in the input shaft

*pdiggitydogg* · 07-28-2005, 04:44 PM

Shouldnt wiggle much, if at all. I would definately return it to where you got it from. No, its not worth rebuilding.

sicones · 07-29-2005, 09:23 AM

we'll summer is coming to an end and we need to get these projects rolling so returing a tranny he got really cheap on ebay and trying to find a new one, I dont think is gonna happen, this guy will do a really cheap rebuild if it comes down to it and we'll just pull the tranny again

*AzCivic* · 07-29-2005, 12:01 PM

pop it open and look inside, or have the tranny guy do it, its not hard. the problem might be obvious.

*pdiggitydogg* · 07-29-2005, 12:16 PM

^Yep. The hardest part is removing the circlip with snap ring pliers

07-28-2005, 09:19 AM	#1
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	input shaft ok me and my brother are both swaping our cars to manual , besides that we both bought 2 manual trannys, and the input shaft on my brothers tranny wiggles like a mofo, and mine does not at all, is that really bad or should he get it rebuilt, we talked to this tranny guy and he said that its not worth rebuilding untill you at least drive with it, what do you think

07-28-2005, 10:54 AM	#2
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 38 Posts: 1,688	there should be minimal play in the input shaft __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-28-2005, 04:44 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	Shouldnt wiggle much, if at all. I would definately return it to where you got it from. No, its not worth rebuilding.

07-29-2005, 09:23 AM	#4
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	we'll summer is coming to an end and we need to get these projects rolling so returing a tranny he got really cheap on ebay and trying to find a new one, I dont think is gonna happen, this guy will do a really cheap rebuild if it comes down to it and we'll just pull the tranny again

07-29-2005, 12:01 PM	#5
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 43 Posts: 3,804	pop it open and look inside, or have the tranny guy do it, its not hard. the problem might be obvious.

07-29-2005, 12:16 PM	#6
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	^Yep. The hardest part is removing the circlip with snap ring pliers