.:HSTuners::


::Hondas Wanted::
 

Go Back   HSTuners > Honda / Acura Cars > Accord
User Name
Password
FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 11-01-2002, 09:44 AM   #1
Asia101
 
Posts: n/a
215/40/18 or 215/45/18?

I have a 2000 3.0 EX Coupe with ABS. I was told that if I go with 40 profiles, then my ABS and speedometer would be off. Does anyone know how bad it will effect my ride? Please respond asap since I have 215/40/18 Yokohama Prada Spec-2 on order!

Thanks!
  Reply With Quote
Old 11-01-2002, 10:42 AM   #2
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
first i will need to know the stock tire size on the car
__________________


ebpda9 is offline   Reply With Quote
Old 11-01-2002, 10:50 AM   #3
spoogenet
 
Posts: n/a
I'm not sure what the V6's have, but I think they've got some 205's on them. Not sure if it's still 15" or bumped up to 16" either.

According to Tirerack then your car comes with 205/60/16. If that is the case, then 215/45/18 would be a ver close match, within 0.07" of stock diameter, in other words it's negligible. 215/40/18 would be almost 1" smaller diameter, in other words very bad choice.

The I4's have 195/65/15 on them, thus the correct tire size for 18" wheels would be 225/40/18. That would yield the closest match to the stock tire diameter. If you went with 215 then 215/40/18 would still yield the closest match to stock. 215/45/18 would be over .6" larger than stock diameter which could affect ABS.

b
  Reply With Quote
Old 11-01-2002, 10:55 AM   #4
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
why it would affect the abs ? doesn't abs make sure that all the wheels have constant speed or doesn't let the wheels lock ? as long as the wheel is turning i don't see a problem
__________________


ebpda9 is offline   Reply With Quote
Old 11-01-2002, 11:15 AM   #5
Asia101
 
Posts: n/a
I believe they are 205/60/16's, I know the rims are 16's. When I was buying tires at Tirerack.com, the guy said 40's are a bad choice because of weight issue and ABS. He said all the Accord V6 with 40's or less have a high tendency to blow out because it will not sustain the weight and that 40's or less is for show and should not be used as daily driving tires...

The thing is, I see so many V6 Accords with 40's or less...so whats up?
  Reply With Quote
Old 11-01-2002, 12:29 PM   #6
ebpda9
Repost Wagon
 
ebpda9's Avatar
 
Join Date: Dec 2001
Location: over here
Age: 43
Posts: 17,266
40 is not an actual measure: it is the ratio of the sidewall to the tire width. they might have wider tires that's why they are 40's
__________________


ebpda9 is offline   Reply With Quote
Old 11-01-2002, 01:10 PM   #7
Asia101
 
Posts: n/a
Hmm, so lets say that I got 225/40/18, would that work? I am not talking just about fitting but the whole diameter shindig Spooge was talking about...
  Reply With Quote
Old 11-04-2002, 12:11 PM   #8
spoogenet
 
Posts: n/a
205/60/16 (stock) diameter: 25.686 in.
225/40/18 diameter: 25.087 in.
225/45/18 diameter: 25.972 in.
215/45/18 diameter: 25.618 in.
215/40/18 diameter: 24.772 in.

Best match is the 215/45/18. If you want wider tires, then you will either be .3" larger or .6" smaller diameter. I'd pick the .3" larger over the .6" smaller just to keep a small delta.

The problem with ABS and TCS is that they can use calculations based upon the tire diameter. From the tire diameter then the car knows how fast you're going, for one. Since the ABS system is basically one that just pulses the brakes, the rate at which it pulses the brakes is very important. If it is programmed to take a speed measurement, pulse at a rate, then evaluate effectiveness, then it could give you too little or too much braking before making an evaluation since its calculations could be thrown off.

Of course there are a variety of ways to program an ABS system and some could be more prone to problems than others when it comes down to diameter changes. Small diameter changes, like on the order of .25" shouldn't affect it at all since those can easily be varied by the load in the car, tire pressure, etc.

I wouldn't worry about it too much unless making a diameter change of, say, .5" or more. But that's just mere speculation.

I'm not sure how Honda's systems work, but as an example some ABS systems work well in snow and others simply lock up the tires. That just gives an idea of how much they can vary.

b
  Reply With Quote
Old 11-04-2002, 04:12 PM   #9
Accord Man
THE GENERAL
 
Accord Man's Avatar
 
Join Date: Aug 2001
Location: Earth (usually)
Age: 41
Posts: 5,698
I would go with 215/40/18 .

with a 45 profile tire, on 18s, 225 would be the better choice. But 225, results in even more stress on the power steering.


So @ 215, with a 40 profile tire, you will be fine.

thats my pick.
__________________
HondaStyle.com Babysitter's Club Member #0


Soon to be >Dr Max Immuh<
Accord Man is offline   Reply With Quote
Old 11-04-2002, 11:51 PM   #10
Hondezy
 
Posts: n/a
this should solve the problem...

http://www.miata.net/garage/tirecalc.html
  Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 02:17 PM.


Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com