.:HSTuners::

11-07-2002, 12:44 PM

Whats Up All,

if anyone knows were i can buy a "Type R" engine for a 98 Accord 2dr coupe. And also a trany swap for auto to manual. let me know thanks

Ric

ebpda9 · 11-07-2002, 12:53 PM

the type r's were made only in europe and i think your car won't be street legal over here, plus the accord type r has the h22a7 engine. might as well go for a h22a4

ebpda9 · 11-07-2002, 01:00 PM

on a second thought you should keep your engine: makes the same power as the h22 plus you have about 45more ft-lbs of torque. the only thing that is messed up is the gearing in your tranny.

11-07-2002, 01:13 PM

break it down a little more. for me still a newbie\

11-07-2002, 02:19 PM

if you have any info on where can i find a Type R engine instant message me @ Darine1629

Thanks,
Ric

ebpda9 · 11-07-2002, 04:39 PM

i tried reaching you but i see that you are not available on AIM so i will break it down for you here:

the Accord Type R (ATR) is available only in Europe, and they don't have the same emissions standars as we have here. Theirs are less restrictive. The ATR has a H22A7 engine, which is basically a prelude engine here. It makes the same power, as the prelude 195-200hp. Your engine makes the same power 198 hp, but you have a lot more torque than the prelude engine. The swap will be a lot harder and will cost more money because you will have to modify the engine bay a lot (motor mounts, intake on your car goes to the left while the prelude goes to the right). A 4 cylinder is a lot easier to do because there is no need to relocate mounts and stuff to have the engine fit. it will almost drop in. Now your car might seem slow but that is not because of the engine, that's because of the gearing ratios inside the transmission. Also there is no manual transmission for your car, unless you find a wrecked 6 speed acura 3.2CL Type S. I really don't know what to advise you, a prelude engine will be somewhat a downgrade from your current engine. The only draw back in your car is the transmission. if u have the money youmight have one custom done for your car, or ask honda if they will sell you one from a 3.2 CLS. if u have any further question ask me:

Yahoo msg: hondaman_iac
MSN msg: hondaman008

i'm not on AIM too much so you won't find me there. When i'm on AIM i'm saritus

ShEaNy · 11-07-2002, 06:32 PM

Basically what hes saying is DONT touch ur engine..Leave it in there...its better then what u want or will get...its just ur tranny thats the problem....just find a better tranny with better gearing or whatever...

ebpda9 · 11-07-2002, 06:54 PM

thanks dr.

ShEaNy · 11-07-2002, 07:03 PM

Just thought id help out

11-07-2002, 11:52 PM

thanks so much you two.

Ric

11-07-2002, 12:44 PM	#1
Darien1629 Posts: n/a	Type R Whats Up All, if anyone knows were i can buy a "Type R" engine for a 98 Accord 2dr coupe. And also a trany swap for auto to manual. let me know thanks Ric

11-07-2002, 12:53 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	the type r's were made only in europe and i think your car won't be street legal over here, plus the accord type r has the h22a7 engine. might as well go for a h22a4 __________________

11-07-2002, 01:00 PM	#3
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	on a second thought you should keep your engine: makes the same power as the h22 plus you have about 45more ft-lbs of torque. the only thing that is messed up is the gearing in your tranny. __________________

11-07-2002, 04:39 PM	#6
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	i tried reaching you but i see that you are not available on AIM so i will break it down for you here: the Accord Type R (ATR) is available only in Europe, and they don't have the same emissions standars as we have here. Theirs are less restrictive. The ATR has a H22A7 engine, which is basically a prelude engine here. It makes the same power, as the prelude 195-200hp. Your engine makes the same power 198 hp, but you have a lot more torque than the prelude engine. The swap will be a lot harder and will cost more money because you will have to modify the engine bay a lot (motor mounts, intake on your car goes to the left while the prelude goes to the right). A 4 cylinder is a lot easier to do because there is no need to relocate mounts and stuff to have the engine fit. it will almost drop in. Now your car might seem slow but that is not because of the engine, that's because of the gearing ratios inside the transmission. Also there is no manual transmission for your car, unless you find a wrecked 6 speed acura 3.2CL Type S. I really don't know what to advise you, a prelude engine will be somewhat a downgrade from your current engine. The only draw back in your car is the transmission. if u have the money youmight have one custom done for your car, or ask honda if they will sell you one from a 3.2 CLS. if u have any further question ask me: Yahoo msg: hondaman_iac MSN msg: hondaman008 i'm not on AIM too much so you won't find me there. When i'm on AIM i'm saritus __________________

11-07-2002, 06:54 PM	#8
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 43 Posts: 17,266	thanks dr. __________________

11-07-2002, 01:13 PM	#4
Darien1629 Posts: n/a	break it down a little more. for me still a newbie\

11-07-2002, 02:19 PM	#5
Darien1629 Posts: n/a	if you have any info on where can i find a Type R engine instant message me @ Darine1629 Thanks, Ric

11-07-2002, 06:32 PM	#7
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 39 Posts: 3,821	Basically what hes saying is DONT touch ur engine..Leave it in there...its better then what u want or will get...its just ur tranny thats the problem....just find a better tranny with better gearing or whatever...

11-07-2002, 07:03 PM	#9
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 39 Posts: 3,821	Just thought id help out

11-07-2002, 11:52 PM	#10
Darien1629 Posts: n/a	thanks so much you two. Ric

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode