.:HSTuners::

01-12-2002, 10:50 PM

well mine is done... but i want to redo it this time on my own cuz im getting a different system.. thus a diff setup....

how do they mornallly measure the size and shapes then cut out wood to perfectly place them in??? i looked at mine and it doesnt make sense...

not just that but then get the whole thing wrapped with like 1 sheet??? ( k well im exagerating... but u know what i mean... )

any close up pics of trunk enclosures or how to's???

i have 2 12" subs
2 amps
1 cap
and 1 lcd screen for the trunk....

maybe the battery.. not sure yet tho.... thanks guys and gurls...

01-13-2002, 02:06 PM

so you have plans and the MDF or wood? Or are you asking whether a butt joint is better than a mitre joint? As far as internal volume, thats pretty easy to calculate roughly.

Accord Man · 01-13-2002, 04:11 PM

Are you going for a *regular* custom encolsure, or you want an all-out show stopper?
So you want to build the enclosure out of what material?
Where do you want it in the trunk / position ?

For the system to sound good, it'll have to be close to perfect.. So are you sure you have the skill to do this..?

01-14-2002, 01:30 AM

well as for the materials.. im using 3/4" & 1/2" MDF and some plexiglass....
i dont care all too much as for maxing out the bass.. just as long as basss does come out... but its more for the show purposes..

and in terms of the joints you mentioned??? do you have a pic of what those look like?? do you neeed special tools to do that?? (like a dremel? or router?)

Accord Man · 01-14-2002, 09:29 AM

IF you have the necessary tools for cutting odd shapes (including rounded shapes) you'll be fine.

Ok, so how many cu ft does each sub require? Sealed or ported?

PS, you should try to keep the firing towards the rear.

01-14-2002, 09:14 PM

Quote:

Originally posted by Accord Man
IF you have the necessary tools for cutting odd shapes (including rounded shapes) you'll be fine.

Ok, so how many cu ft does each sub require? Sealed or ported?

PS, you should try to keep the firing towards the rear.

well if im not mistaken... the 12" are 1.5 cubic foot.... most likely sealed cuz for the shows i doesnt matter if they pound or not.... i would like just decent bass for when i only listen when driving....

01-15-2002, 12:05 AM

Tony you got a screen for the trunk? !!!!!

I'd like to see this thing finished out or if you need a hand or something gimme a shout. Don't think i'll be of much help though

01-15-2002, 08:02 AM

Quote:

Originally posted by insomniac
Tony you got a screen for the trunk? !!!!!

I'd like to see this thing finished out or if you need a hand or something gimme a shout. Don't think i'll be of much help though

yea my cousin is sending them up to me from cali.... so im excited

01-15-2002, 01:32 PM

Them as in you got more then one and gonna put one in the dash??

01-15-2002, 04:24 PM

yea one dash and one in the front... im not putting the lcd's in the headrests no more... too much work....

01-15-2002, 09:20 PM

Nice, this I can't wait to see

01-24-2002, 01:05 PM

i was in your same boat.. so i searched around the internet and found instructions on how to make it out of fiberglass..

i followed the step to the line and ended up with SWEET results..

heres some links

(this guy goes into great detail with pics)
http://members.iinet.net.au/~nismo/subs.html

(so-so tutorial but has illustrations)
http://www.geocities.com/MotorCity/7165/how_to_1.htm

(for all those that want to setup kickpanels)
http://www.sentra.net/solm/december00/kickpanel.shtml

4jacks · 02-15-2002, 07:39 PM

h82lose,

Great link man! Got some good Idea's running into my head

Azn ,,, and others...

Stead of paint you can use felt very easily, go to the fabric shop buy a couple yards, get some liquid nails smear it all around so that it's a very light coat, and smooth out the felt, get the expensive thick felt, it still only cost a couple bucks a yard. I did this for a really crappy box I had, the felt was the only thing that turned out good!!!

Patrick
4jacks

02-15-2002, 08:26 PM

the triple sub trunk box started out looking like @$$ but ended up looking pretty good... nice link. the other two are uh.. bad.

03-09-2002, 11:49 PM

man that looks like WAY too much work for me to not fudge up

01-12-2002, 10:50 PM	#1
azn_nite_ryder Posts: n/a	how to make custom trunk enclosure?? well mine is done... but i want to redo it this time on my own cuz im getting a different system.. thus a diff setup.... how do they mornallly measure the size and shapes then cut out wood to perfectly place them in??? i looked at mine and it doesnt make sense... not just that but then get the whole thing wrapped with like 1 sheet??? ( k well im exagerating... but u know what i mean... ) any close up pics of trunk enclosures or how to's??? i have 2 12" subs 2 amps 1 cap and 1 lcd screen for the trunk.... maybe the battery.. not sure yet tho.... thanks guys and gurls...

01-13-2002, 04:11 PM	#3
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	Are you going for a regular custom encolsure, or you want an all-out show stopper? So you want to build the enclosure out of what material? Where do you want it in the trunk / position ? For the system to sound good, it'll have to be close to perfect.. So are you sure you have the skill to do this..? __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

01-14-2002, 09:29 AM	#5
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 41 Posts: 5,698	IF you have the necessary tools for cutting odd shapes (including rounded shapes) you'll be fine. Ok, so how many cu ft does each sub require? Sealed or ported? PS, you should try to keep the firing towards the rear. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

02-15-2002, 07:39 PM	#13
4jacks Registered User Join Date: Jan 2002 Location: Cecil County, Maryland Age: 44 Posts: 1,129	h82lose, Great link man! Got some good Idea's running into my head Azn ,,, and others... Stead of paint you can use felt very easily, go to the fabric shop buy a couple yards, get some liquid nails smear it all around so that it's a very light coat, and smooth out the felt, get the expensive thick felt, it still only cost a couple bucks a yard. I did this for a really crappy box I had, the felt was the only thing that turned out good!!! Patrick 4jacks __________________ Patrick 4jacks 4jacks@gmail.com Happy Honda'ing

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-13-2002, 02:06 PM	#2
DemonicAccord Posts: n/a	so you have plans and the MDF or wood? Or are you asking whether a butt joint is better than a mitre joint? As far as internal volume, thats pretty easy to calculate roughly.

01-14-2002, 01:30 AM	#4
azn_nite_ryder Posts: n/a	well as for the materials.. im using 3/4" & 1/2" MDF and some plexiglass.... i dont care all too much as for maxing out the bass.. just as long as basss does come out... but its more for the show purposes.. and in terms of the joints you mentioned??? do you have a pic of what those look like?? do you neeed special tools to do that?? (like a dremel? or router?)

01-15-2002, 12:05 AM	#7
insomniac Posts: n/a	Tony you got a screen for the trunk? !!!!! I'd like to see this thing finished out or if you need a hand or something gimme a shout. Don't think i'll be of much help though

01-15-2002, 01:32 PM	#9
insomniac Posts: n/a	Them as in you got more then one and gonna put one in the dash??

01-15-2002, 04:24 PM	#10
azn_nite_ryder Posts: n/a	yea one dash and one in the front... im not putting the lcd's in the headrests no more... too much work....

01-15-2002, 09:20 PM	#11
insomniac Posts: n/a	Nice, this I can't wait to see

01-24-2002, 01:05 PM	#12
h82lose Posts: n/a	i was in your same boat.. so i searched around the internet and found instructions on how to make it out of fiberglass.. i followed the step to the line and ended up with SWEET results.. heres some links (this guy goes into great detail with pics) http://members.iinet.net.au/~nismo/subs.html (so-so tutorial but has illustrations) http://www.geocities.com/MotorCity/7165/how_to_1.htm (for all those that want to setup kickpanels) http://www.sentra.net/solm/december00/kickpanel.shtml

02-15-2002, 08:26 PM	#14
Maxvla Posts: n/a	the triple sub trunk box started out looking like @$$ but ended up looking pretty good... nice link. the other two are uh.. bad.

03-09-2002, 11:49 PM	#15
Azkikr111 Posts: n/a	man that looks like WAY too much work for me to not fudge up