.:HSTuners::::Hondas Wanted:: |
02-22-2003, 10:53 AM
|
#1 |
|
Posts: n/a
|
skunk2 cams
the skunk2 web page says the skunk2 stage 1 cams can be used with a stock valve train. is this true? does anybody have stage 1 cams with a stock vavle train? if so, how reliable would it be?
|
|
|
02-22-2003, 08:03 PM
|
#2 |
|
Posts: n/a
|
you should be fine w/ the stage 1 cams on a stock valvetrain. i know of quite a few people running that setup is gsr's and they have no problems.
|
|
|
|
02-23-2003, 01:07 PM
|
#3 |
|
Posts: n/a
|
But if its all the same, i'd still get better springs and retainers with the cams.
|
|
|
|
02-23-2003, 10:06 PM
|
#4 |
|
Posts: n/a
|
yes they can be used with the stock valvetrain and yes it's reliable.
|
|
|
|
02-23-2003, 10:08 PM
|
#5 |
|
Posts: n/a
|
PS, be sure to get cam gears and some dyno time to get maximum performance from these camshafts
 |
|
|
|
03-07-2003, 02:48 PM
|
#6 |
|
Posts: n/a
|
maybe even vtec controller. better yet hondata for the full benefits!!
|
|
|
|
03-09-2003, 05:46 PM
|
#7 |
|
Registered User
Join Date: Dec 2002
Location: Kenosha, WI
Age: 39
Posts: 1,137
|
i'd say get the springs and retainers... if your gonna take the head apart, might as well swap those stock springs/retainers..it'll save you time and money
__________________
RICE....is good |
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
