.:HSTuners::

JDMFantasy2k · 07-31-2006, 10:44 PM

Well my civic didn't come with a sway bar, and instead of buying one. I kinda made my own. The civic Si comes with a 13mm sway and if you go bigger than that you're supposed to re-inforce the subframe so you don't rip it out.

Luckily my friend gave me his 14mm gsr sway bar since he upgraded his to an ITR. The size is close to stock so i couldn't wait to throw it on. Got some Si endlinks, only to find out that the bolts are too big for the bushings in the GSR sway bar. So i knocked out the bushings and replaced them...

GSR swaybar

AS you can see, too much space w/o a bushing...

3/8" steel fitting with an allen screw retaining bolt. Take the little screw shit out, and it makes a nice bushing.

Needs a little persuasion to fit into the swaybar

O0

Now use a 13/32" bit to open it up a bit since the endlink is a little bigger than 3/8"

And then weld the fucker in place without any welding gas because that's the HMT way :6

Sorry for the shitty pics, i had to use my phone. But i think this is a pretty good upgrade for civic owners who don't have rear sway's. Total this project cost me 45 bucks, cause the endlinks are like 20 a piece from advance auto (40 a piece from honda), and the little steel collars are like 2.39 a piece, and the bar was free nigga.

IALuder · 08-01-2006, 04:36 PM

lol. awesome idea.

sicones · 08-01-2006, 07:56 PM

ASR sells those metal bushings separately that go into the end of the bar, could have gotten them for like $5~8 shipped, if you ever need any parts like that again IM COng825810, he's the guy from ASR very helpful

*Whtehnda93DXSdn* · 02-09-2007, 02:35 PM

Not bad work at all man...good way to improvise. thanks for sharing.

JDMFantasy2k · 02-12-2007, 11:27 PM

Thanks man

07-31-2006, 10:44 PM	#1
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	homemade sway bar Well my civic didn't come with a sway bar, and instead of buying one. I kinda made my own. The civic Si comes with a 13mm sway and if you go bigger than that you're supposed to re-inforce the subframe so you don't rip it out. Luckily my friend gave me his 14mm gsr sway bar since he upgraded his to an ITR. The size is close to stock so i couldn't wait to throw it on. Got some Si endlinks, only to find out that the bolts are too big for the bushings in the GSR sway bar. So i knocked out the bushings and replaced them... GSR swaybar AS you can see, too much space w/o a bushing... 3/8" steel fitting with an allen screw retaining bolt. Take the little screw shit out, and it makes a nice bushing. Needs a little persuasion to fit into the swaybar O0 Now use a 13/32" bit to open it up a bit since the endlink is a little bigger than 3/8" And then weld the fucker in place without any welding gas because that's the HMT way :6 Sorry for the shitty pics, i had to use my phone. But i think this is a pretty good upgrade for civic owners who don't have rear sway's. Total this project cost me 45 bucks, cause the endlinks are like 20 a piece from advance auto (40 a piece from honda), and the little steel collars are like 2.39 a piece, and the bar was free nigga. __________________

08-01-2006, 04:36 PM	#2
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	lol. awesome idea. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

02-09-2007, 02:35 PM	#4
Whtehnda93DXSdn It has 4 Doors... Join Date: Nov 2001 Location: Fredericksburg,Va Age: 50 Posts: 907	Not bad work at all man...good way to improvise. thanks for sharing. __________________ Another good forum site: Tuners Alliance

02-12-2007, 11:27 PM	#5
JDMFantasy2k Registered User Join Date: Mar 2004 Location: northeastern connecticut Age: 38 Posts: 1,765	Thanks man __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-01-2006, 07:56 PM	#3
sicones Registered User Join Date: Apr 2003 Location: the MVP garage, New York City Posts: 516	ASR sells those metal bushings separately that go into the end of the bar, could have gotten them for like $5~8 shipped, if you ever need any parts like that again IM COng825810, he's the guy from ASR very helpful