.:HSTuners::

IALuder · 02-06-2005, 08:34 AM

I am about to throw on a dry Zex kit with a 65 shot. It will have two stop colder coper core ngk's. My question is will I need to worry about retarding timing 2 degrees like recomended or worry that it will lean out? I'm not too worried about it leaning out cause it already runs a little rich like most ludes with intake and full exhaust but just want to make sure.

*AzCivic* · 02-06-2005, 12:03 PM

i'd retard the timing, some people spray that size shot w/out retarding it and they're fine. look into the msd digital 6 for a.) a soft touch rev-limit(i.e. it cuts spark not fuel like the factory rev-limit, which can be very bad when spraying) b.) you can wire it in with the nitrous so that it will automatically retard timing only when your spraying.

02-06-2005, 08:34 AM	#1
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	65 shot I am about to throw on a dry Zex kit with a 65 shot. It will have two stop colder coper core ngk's. My question is will I need to worry about retarding timing 2 degrees like recomended or worry that it will lean out? I'm not too worried about it leaning out cause it already runs a little rich like most ludes with intake and full exhaust but just want to make sure. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-06-2005, 12:03 PM	#2
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	i'd retard the timing, some people spray that size shot w/out retarding it and they're fine. look into the msd digital 6 for a.) a soft touch rev-limit(i.e. it cuts spark not fuel like the factory rev-limit, which can be very bad when spraying) b.) you can wire it in with the nitrous so that it will automatically retard timing only when your spraying.