.:HSTuners::::Hondas Wanted:: |
|
|
01-03-2003, 01:34 PM
|
#1 |
|
Posts: n/a
|
Neon trouble
Wasnt sure if this was the rite board but i am having trouble with my streetglow underbody neon kit. Had it installed and now the front and the left tubes are fine but the right only lites up half and the back doesnt at all. I think it is the condensation but how would i fix condensation from getting in?
|
|
|
01-03-2003, 02:15 PM
|
#2 |
|
3rd Gear
Join Date: Oct 2002
Location: allendale, mi
Age: 42
Posts: 568
|
silicone sealent
chris
__________________
|
|
|
|
01-03-2003, 11:20 PM
|
#3 |
|
Posts: n/a
|
Can you see any moisture in the neons?
|
|
|
|
01-10-2003, 12:06 AM
|
#4 |
|
Posts: n/a
|
yes i see it in the ones not working
|
|
|
|
01-10-2003, 01:13 PM
|
#5 |
|
Posts: n/a
|
where do u buy silicon sealant?
|
|
|
|
01-10-2003, 01:13 PM
|
#6 | |
|
Insomniac Moderator
Join Date: Aug 2001
Location: OR
Age: 44
Posts: 11,142
|
Quote:
Any hardware store, auto store, etc.
__________________
1994 Accord EX coupe --Need hosting for your pics on HST? PM me...-- |
|
|
|
|
|
01-10-2003, 01:51 PM
|
#7 |
|
Posts: n/a
|
k thx hope that does it
|
|
|
|
01-10-2003, 01:51 PM
|
#8 |
|
2nd Gear
Join Date: Apr 2002
Location: VA
Posts: 122
|
be sure to get out the condensation already in there before you seal.. either let dry in heat or you could try a hair dryer... had to do that with my corners before i sealed.
__________________
krz2fer --- "Aim for the sky, straight into the sun." |
|
|
|
|
01-10-2003, 09:25 PM
|
#9 |
|
Posts: n/a
|
im going to leave it by the heater for a while i hope that fixes it
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
