.:HSTuners::

08-13-2002, 11:37 AM

i have a 99 accord 4-door and i can't find anyone to install the exhaust w/ my work/school schedule.

to all of you who have done your own: how hard is it to do? what do i need to do it? can i do it without a lift?

*ChrisCantSkate* · 08-13-2002, 11:46 AM

its not hard, the hardest part is getting the bolts on your cat free, but since you have a 99.. i'd just spray some liquid wrench on it about 2 hours before you go to install it. it will bolt right in. not very hard at all.

08-13-2002, 11:51 AM

ok, that's what i thought. do i need a lift to do it, or will jack stands give me enough room to work?

08-13-2002, 01:39 PM

I did cat back on my civic with just jack stands - a bit of a tight squeeze, but it's a quick & easy job. Take 4thGen's suggestion about the bolts - I went through a couple of drill bits on mine.

ebpda9 · 08-13-2002, 10:53 PM

if the scres are burnt jus put some water on them. it works better than wd 40 and all those aditives. if it does not work with water it's a lost cause: you need to cut them

*ChrisCantSkate* · 08-13-2002, 10:56 PM

well, depends on how much room you think is enough. but you should be fine. i never knew about the water thing, u sure it works better than soaking the bolts?

ebpda9 · 08-14-2002, 12:16 AM

Quote:

Originally posted by 4thGenlude
i never knew about the water thing, u sure it works better than soaking the bolts?

i did not believe it either, until i tried it.

08-21-2002, 05:13 PM

thanks for the help guys. i got a thermal R&D classic cat-back today... install tomorrow. i'll let you know how it goes.

08-23-2002, 07:58 AM

well, it's in and it looks great - all polished SS. took me about 30-45 min w/ the use of an acetylene torch to heat the nuts.

anyone know where i can get a lifetime supply of earplugs?

08-13-2002, 11:37 AM	#1
XdiscontensionX Posts: n/a	cat-back install i have a 99 accord 4-door and i can't find anyone to install the exhaust w/ my work/school schedule. to all of you who have done your own: how hard is it to do? what do i need to do it? can i do it without a lift?

08-13-2002, 11:46 AM	#2
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 41 Posts: 9,662	its not hard, the hardest part is getting the bolts on your cat free, but since you have a 99.. i'd just spray some liquid wrench on it about 2 hours before you go to install it. it will bolt right in. not very hard at all. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

08-13-2002, 10:53 PM	#5
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	if the scres are burnt jus put some water on them. it works better than wd 40 and all those aditives. if it does not work with water it's a lost cause: you need to cut them __________________

08-13-2002, 10:56 PM	#6
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 41 Posts: 9,662	well, depends on how much room you think is enough. but you should be fine. i never knew about the water thing, u sure it works better than soaking the bolts? __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-13-2002, 11:51 AM	#3
XdiscontensionX Posts: n/a	ok, that's what i thought. do i need a lift to do it, or will jack stands give me enough room to work?

08-13-2002, 01:39 PM	#4
Mushroom Posts: n/a	I did cat back on my civic with just jack stands - a bit of a tight squeeze, but it's a quick & easy job. Take 4thGen's suggestion about the bolts - I went through a couple of drill bits on mine.

08-21-2002, 05:13 PM	#8
XdiscontensionX Posts: n/a	thanks for the help guys. i got a thermal R&D classic cat-back today... install tomorrow. i'll let you know how it goes.

08-23-2002, 07:58 AM	#9
XdiscontensionX Posts: n/a	well, it's in and it looks great - all polished SS. took me about 30-45 min w/ the use of an acetylene torch to heat the nuts. anyone know where i can get a lifetime supply of earplugs?