.:HSTuners::

Jayberg00 · 06-21-2004, 01:38 AM

How hard is it or u have to get it professionally done and how much will it cost

Shaved &/or Laid · 06-21-2004, 02:01 AM

www.exospeed.com

*pdiggitydogg* · 06-21-2004, 04:12 AM

no, you cant do it yourself
different companies cost different amounts...but its always around $1000+

*AzCivic* · 06-21-2004, 05:11 AM

i think golden eagle has a deal for 750$, but the best blocks are $950 from benson.

06-21-2004, 06:56 AM

What is it to sleeve a block?

*pdiggitydogg* · 06-21-2004, 03:51 PM

thicker cylider walls

06-21-2004, 05:10 PM

I see...and why would you want to sleeve a block? What purpose would it serve?

*pdiggitydogg* · 06-21-2004, 06:47 PM

under stress cylinder walls change shape - oval
thats fine until you want to make a good lot more hp (block depending)
Say you want to add around big lbs of boost, or a large shot of n2o....or a totally mad sick jdm y0 n/a build...Well the stock sleeves of the engine probably (at all) cant handle that kind of power and under the immense amount of stress they crack.
So you just get larger, thicker, tougher sleeves put in.

06-21-2004, 07:29 PM

Understand...thanks.

nonovurbizniz · 06-21-2004, 10:40 PM

Lots of local machine shops are more than equiped to do it...

My buddy had a guy who has a whole machine shop in his garage... I keep putting off finding out what he charges for side jobs... cuz I don't have the money for sleeves... much less the money to necessitate sleeves.

thermal · 06-26-2004, 12:32 AM

A few people whom I know locally had problems with GE sleeves sinking. Not to ruin their reputation cuz I'm sure that not all sinks. I do prefer Benson's, Darton, or AEBS.

06-26-2004, 10:37 AM

heard good things about Midway sleeves. Cheaper than dartons, and supposedly just as strong (or so I am told)

06-21-2004, 01:38 AM	#1
Jayberg00 1st Gear Join Date: Nov 2002 Location: Newark, Nj Age: 40 Posts: 83	Sleeving a block How hard is it or u have to get it professionally done and how much will it cost __________________ "5 Speed Imports" The New Racers, Gear Up .

06-21-2004, 02:01 AM	#2
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	www.exospeed.com __________________ Doody Ej1 Yse.

06-21-2004, 10:40 PM	#10
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 47 Posts: 2,693	Lots of local machine shops are more than equiped to do it... My buddy had a guy who has a whole machine shop in his garage... I keep putting off finding out what he charges for side jobs... cuz I don't have the money for sleeves... much less the money to necessitate sleeves. __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...

06-26-2004, 12:32 AM	#11
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	A few people whom I know locally had problems with GE sleeves sinking. Not to ruin their reputation cuz I'm sure that not all sinks. I do prefer Benson's, Darton, or AEBS. __________________ Project Teg Visit the Turbo Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-21-2004, 04:12 AM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	no, you cant do it yourself different companies cost different amounts...but its always around $1000+

06-21-2004, 05:11 AM	#4
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	i think golden eagle has a deal for 750$, but the best blocks are $950 from benson.

06-21-2004, 06:56 AM	#5
Kool-Aid Posts: n/a	What is it to sleeve a block?

06-21-2004, 03:51 PM	#6
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	thicker cylider walls

06-21-2004, 05:10 PM	#7
Kool-Aid Posts: n/a	I see...and why would you want to sleeve a block? What purpose would it serve?

06-21-2004, 06:47 PM	#8
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	under stress cylinder walls change shape - oval thats fine until you want to make a good lot more hp (block depending) Say you want to add around big lbs of boost, or a large shot of n2o....or a totally mad sick jdm y0 n/a build...Well the stock sleeves of the engine probably (at all) cant handle that kind of power and under the immense amount of stress they crack. So you just get larger, thicker, tougher sleeves put in.

06-21-2004, 07:29 PM	#9
Kool-Aid Posts: n/a	Understand...thanks.

06-26-2004, 10:37 AM	#12
Honda_Tengoku Posts: n/a	heard good things about Midway sleeves. Cheaper than dartons, and supposedly just as strong (or so I am told)