.:HSTuners::::Hondas Wanted:: |
04-26-2003, 12:29 PM
|
#1 |
|
1st Gear
Join Date: Apr 2003
Location: Patton, PA
Age: 40
Posts: 57
|
PowerTech Headers
Yeah I just got my new headers on. They are 4 to 1 headers. I have a slight problem with them, my car is stock hight and the headers stick down low so they bottom out. Special on back roads but do fine on main roads. I was just wandering if anyone had any ideas to fix this or just some thoughts on the whole thing.
__________________
Mods on Car include: --------------------------- Halo lights - Altezza taillights Clear bumper - Corner - Side lights Mesh grill Air intake - Obx b5 bomb muffler powertech headers Alpine head deck Audiobahn Subs/amps/speakers race pedals - Inside neons short shifter -glo guages front and rear strut bars (APC) Full custom painted interior back seat reupholstered in vinly Ground Control coilovers tokico HP struts Stage 2 racing clutch APC Race seats Mugen racing harnesses AeroSpeed quick clutch |
|
|
|
04-26-2003, 01:00 PM
|
#2 | |
|
4th Gear
Join Date: Aug 2002
Location: Mukilteo, Washington
Age: 41
Posts: 960
|
I'm gonna a be a dick.. but its header.. single..
As for your problem.. I've heard it before, but I don't remember what was said.. sorry
__________________
 My Baby Unbelievable... Quote:
|
|
|
|
|
|
04-26-2003, 02:33 PM
|
#3 |
|
Repost Wagon
Join Date: Dec 2001
Location: over here
Age: 44
Posts: 17,266
|
i don't think there is a way to fix that unless you feel like bending the pipe. i never heard of powertech either :o
__________________
 
|
|
|
|
|
04-26-2003, 09:46 PM
|
#4 |
|
1st Gear
Join Date: Apr 2003
Location: Patton, PA
Age: 40
Posts: 57
|
Nah thats not being a dick that is just helping my english. So thanks. Yeah they are really nice ceramic coated headers (noticed a nice power gain), but there a 4 pipes the whole way to the cat and that why it rubs which sucks cause i wont be able to lower my car.
__________________
Mods on Car include: --------------------------- Halo lights - Altezza taillights Clear bumper - Corner - Side lights Mesh grill Air intake - Obx b5 bomb muffler powertech headers Alpine head deck Audiobahn Subs/amps/speakers race pedals - Inside neons short shifter -glo guages front and rear strut bars (APC) Full custom painted interior back seat reupholstered in vinly Ground Control coilovers tokico HP struts Stage 2 racing clutch APC Race seats Mugen racing harnesses AeroSpeed quick clutch |
|
|
|
|
04-26-2003, 10:21 PM
|
#5 |
|
Posts: n/a
|
only way to fix it would be to get a different header. I hope I don't have that problem w/my DC Sports 4-2-1 header.
|
|
|
|
04-27-2003, 03:15 PM
|
#6 |
|
1st Gear
Join Date: Apr 2003
Location: Patton, PA
Age: 40
Posts: 57
|
You shouldnt have a problem because its 4-2-1 just two pipes will be on bottom and there side by side so there should be no problem.
__________________
Mods on Car include: --------------------------- Halo lights - Altezza taillights Clear bumper - Corner - Side lights Mesh grill Air intake - Obx b5 bomb muffler powertech headers Alpine head deck Audiobahn Subs/amps/speakers race pedals - Inside neons short shifter -glo guages front and rear strut bars (APC) Full custom painted interior back seat reupholstered in vinly Ground Control coilovers tokico HP struts Stage 2 racing clutch APC Race seats Mugen racing harnesses AeroSpeed quick clutch |
|
|
|
|
04-27-2003, 10:52 PM
|
#7 | |
|
Posts: n/a
|
Quote:
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
