.:HSTuners::

VTracer19 · 04-13-2003, 02:24 PM

Okay so as some of u know that i got my clutch install over the weekend.....and after spending only 200 for the install, i'm happy, BUT i'm also little pissed. Well the thing is that i stalled three times getting out of hte parking lot of the shop, the problem with the clutch is that as soon as i lift the clutch like a inch it's already ingaged, the guy that installed it warned me about the quick engagment but he also hold me about a hydrolic kit that i can get, anyone know anything about this?? He said that the kit lifts the clutch pedel some so that is a space before it engages, so it doesn't engage as soon as i lift the pedel a inch. If this cant be done anyone know why my car shakes like crazy trying to get into 1st. Other than that the car shift alot better and on the highway it's even more fun to drive....thanx peace

ebpda9 · 04-13-2003, 03:24 PM

well i noticed the same problem on some civics with aftermarket clutches. i never heard of the kit thou. maybe you can do it from the cable. i'm sure you will get used to it. i stalled 3 times a civic in front of the customer because of his aftermarket clutch.

VTracer19 · 04-13-2003, 08:00 PM

LOL...yeah it was deffinitally a scary ride home....it really hits hard, and makes my tires hope too...i try to shift slower but i almost stall every time.....yo 94_accord when u read this i couldn't get ur short throw on...i coudln't get to the screws that are next to the seat....nothing will fit there andi didn't want to tear up my car, anyways if anyone has any, ANY, suggestion on how i can make shifting easier it will be appreciated....peace

94_AcCoRd_EX · 04-13-2003, 08:42 PM

Quote:

Originally posted by VTracer19
LOL...yeah it was deffinitally a scary ride home....it really hits hard, and makes my tires hope too...i try to shift slower but i almost stall every time.....yo 94_accord when u read this i couldn't get ur short throw on...i coudln't get to the screws that are next to the seat....nothing will fit there andi didn't want to tear up my car, anyways if anyone has any, ANY, suggestion on how i can make shifting easier it will be appreciated....peace

Well, my ACT clutch grips a little lower than stock, but not much. I'd try another shop to see if they'll adjust it!?!

Hmm... there are no screws that are hard to reach to take the console off. Maybe I gave bad directions.

Checklist:

2 screws in the bottom (under trap door) of armrest/console
2 screws below cupholder
1 screw at an angle next to the cupholder
1 screw behind the ashtray

Unhook the emergency flashers/clock leads. There may be one or two more screws, but theres nothing a normal phillips driver won't reach. Do you have a picture? I'm probably just a little confused.

VTracer19 · 04-13-2003, 09:46 PM

I dont want to spend more money on adjusting the clutch....i'm starting to get use to it but it's a little enoying when i shift into 1st and 2nd and my tires hop and everything shakes.....i dont know if that's normal

johnriley · 04-14-2003, 08:28 AM

I just got a new clutch last week and now after 500+ miles I am starting to get used to it. Yes it was kinda harsh the first couple of days, I'm still trying to perfect first gear-I keep peeling out. Overall the new clutch is great and my car seems alot quicker.

VTracer19-did the guy who put in your clutch tell you about the break-in period. Go easy on it for 500 miles before you start to drive like a madman!

VTracer19 · 04-14-2003, 10:55 AM

yeah the only time i drive is to school so there's 140 miles a weekend so in a few weeks to ur break period it should get better but damn it deff has a harsh engagment and i think i deff peel out 1st gear but i cant stop the tire hop....i tried to use less RPM's when changing to 1st but i almost stall....i'll have to go out one day and just fool around and see what i can do...peace

94_AcCoRd_EX · 04-14-2003, 01:16 PM

If you're getting wheel hop from burning out, that's more of a suspension issue.

VTracer19 · 04-14-2003, 02:32 PM

what can be done to correct this?

04-13-2003, 02:24 PM	#1
VTracer19 1st Gear Join Date: Jan 2003 Location: VERMONT Age: 42 Posts: 96	The Aftermath Okay so as some of u know that i got my clutch install over the weekend.....and after spending only 200 for the install, i'm happy, BUT i'm also little pissed. Well the thing is that i stalled three times getting out of hte parking lot of the shop, the problem with the clutch is that as soon as i lift the clutch like a inch it's already ingaged, the guy that installed it warned me about the quick engagment but he also hold me about a hydrolic kit that i can get, anyone know anything about this?? He said that the kit lifts the clutch pedel some so that is a space before it engages, so it doesn't engage as soon as i lift the pedel a inch. If this cant be done anyone know why my car shakes like crazy trying to get into 1st. Other than that the car shift alot better and on the highway it's even more fun to drive....thanx peace

04-13-2003, 03:24 PM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	well i noticed the same problem on some civics with aftermarket clutches. i never heard of the kit thou. maybe you can do it from the cable. i'm sure you will get used to it. i stalled 3 times a civic in front of the customer because of his aftermarket clutch. __________________

04-14-2003, 01:16 PM	#8
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	If you're getting wheel hop from burning out, that's more of a suspension issue. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-13-2003, 08:00 PM	#3
VTracer19 1st Gear Join Date: Jan 2003 Location: VERMONT Age: 42 Posts: 96	LOL...yeah it was deffinitally a scary ride home....it really hits hard, and makes my tires hope too...i try to shift slower but i almost stall every time.....yo 94_accord when u read this i couldn't get ur short throw on...i coudln't get to the screws that are next to the seat....nothing will fit there andi didn't want to tear up my car, anyways if anyone has any, ANY, suggestion on how i can make shifting easier it will be appreciated....peace

04-13-2003, 09:46 PM	#5
VTracer19 1st Gear Join Date: Jan 2003 Location: VERMONT Age: 42 Posts: 96	I dont want to spend more money on adjusting the clutch....i'm starting to get use to it but it's a little enoying when i shift into 1st and 2nd and my tires hop and everything shakes.....i dont know if that's normal

04-14-2003, 08:28 AM	#6
johnriley 2nd Gear Join Date: Jun 2002 Location: Kansas City, Mo Age: 45 Posts: 211	I just got a new clutch last week and now after 500+ miles I am starting to get used to it. Yes it was kinda harsh the first couple of days, I'm still trying to perfect first gear-I keep peeling out. Overall the new clutch is great and my car seems alot quicker. VTracer19-did the guy who put in your clutch tell you about the break-in period. Go easy on it for 500 miles before you start to drive like a madman!

04-14-2003, 10:55 AM	#7
VTracer19 1st Gear Join Date: Jan 2003 Location: VERMONT Age: 42 Posts: 96	yeah the only time i drive is to school so there's 140 miles a weekend so in a few weeks to ur break period it should get better but damn it deff has a harsh engagment and i think i deff peel out 1st gear but i cant stop the tire hop....i tried to use less RPM's when changing to 1st but i almost stall....i'll have to go out one day and just fool around and see what i can do...peace

04-14-2003, 02:32 PM	#9
VTracer19 1st Gear Join Date: Jan 2003 Location: VERMONT Age: 42 Posts: 96	what can be done to correct this?