.:HSTuners::

09-15-2001, 06:57 PM

where does it go? also what about a inline fuel pump thanks!

09-15-2001, 07:40 PM

The Vortech unit will work with any source of boost. I mount them on the intake manifold and tee it off the fuel pressure regulator vaccum line. What exactly do you want to know about the inline pump you didnt specify.

GT40FIED · 09-23-2001, 02:27 PM

Vortech FMUs are really quite good. Never run one on a turbo but I'd assume they'd work the same way. I mean...it's only job is to pinch off the fuel return line as boost rises. I figure it'd be pretty hard to screw that up. Of course...there may also be something to be said for FMUs like Cartech...or something that specifically designed for a turbo. Any manifold vacuum source would work in hooking it up. They're really quite easy.

10-07-2001, 02:12 PM

from what I was told, the Vortech is not adjustable like the Cartech. I just bought a Holley adjustable boost dependant fuel pressure regulator and can't wait to put that bad boy on. (Side note)

10-08-2001, 06:55 AM

Vortech does have an adjustable one and it is very good. It is not he regular FMU that is included with a ton of kits but it is obtainable through Vortech directly. I think it retails for 289.00. It listed in the assesories and under the fuel components.

www.vortechsuperchargers.com

09-15-2001, 06:57 PM	#1
importboi22 Posts: n/a	vortech FMU where does it go? also what about a inline fuel pump thanks!

09-23-2001, 02:27 PM	#3
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 42 Posts: 7,451	Vortech FMUs are really quite good. Never run one on a turbo but I'd assume they'd work the same way. I mean...it's only job is to pinch off the fuel return line as boost rises. I figure it'd be pretty hard to screw that up. Of course...there may also be something to be said for FMUs like Cartech...or something that specifically designed for a turbo. Any manifold vacuum source would work in hooking it up. They're really quite easy. __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-15-2001, 07:40 PM	#2
Boosted3g Posts: n/a	The Vortech unit will work with any source of boost. I mount them on the intake manifold and tee it off the fuel pressure regulator vaccum line. What exactly do you want to know about the inline pump you didnt specify.

10-07-2001, 02:12 PM	#4
Mr Sleeper Posts: n/a	from what I was told, the Vortech is not adjustable like the Cartech. I just bought a Holley adjustable boost dependant fuel pressure regulator and can't wait to put that bad boy on. (Side note)

10-08-2001, 06:55 AM	#5
Boosted3g Posts: n/a	Vortech does have an adjustable one and it is very good. It is not he regular FMU that is included with a ton of kits but it is obtainable through Vortech directly. I think it retails for 289.00. It listed in the assesories and under the fuel components. www.vortechsuperchargers.com