.:HSTuners::

*pdiggitydogg* · 02-16-2005, 01:08 PM

I have thought about this topic, off and on, ever since it was brought to my attention. Today, I decide to ask your opinion.

Why do people spend hundreds, if not close to $1000+ plus on five lug conversions, when it would be just the same to swap the hubs from a crv? Not the knuckle, just the hub.
In the rear you'd need to go itr hubs because Im pretty sure crv's never had rear disc.

Am I wrong or does that make sense? Going that route, one wouldnt need to redrill rotors to fit nsx/itr calipers on the ex/si/abs/integra knuckle.

Now, granted, if one wasnt planning on going 5lug at all, this would be more expensive than just redrilling the rotors. But say if someone wanted the 'bling factor' of it, the increased stability from an added lug, and wanted itr+ calipers...then it makes sense.

Tell me why this doesnt work.

*AzCivic* · 02-16-2005, 01:20 PM

i don't get the whole thing to begin with.

ebpda9 · 02-16-2005, 01:28 PM

why do a 5 lug conversion in the first place ? my 4 lugs are just fine the way they are after 172 k miles and lots of abuse.

*pdiggitydogg* · 02-16-2005, 01:35 PM

bigger brakes w/o redrilling
"added stability" of an extra lug (I personally find this hard to buy into)
Bling factor

There are probably other reasons that I cant think of...Its mostly bling

ebpda9 · 02-16-2005, 02:23 PM

hmm how many ppl do that ? that sounds just like a business idea. sell the hubs, bearings and the studs from honda

. btw an you get me a list of all those parts needed ?

*pdiggitydogg* · 02-16-2005, 02:48 PM

that'd be all as far as I can tell...
Hubs, studs, and bearings. You could even have a special package that included extened wheel studs.

MissJDM · 02-16-2005, 08:59 PM

Anybody doing the 5lug conv, would their calipers fit on the CRV?

I've never noticed CRV wheels, are they the same five 5lug pattern in specific?

PAT you have the cooless, random ideas, dude.

*pdiggitydogg* · 02-16-2005, 10:03 PM

Im not sure of the caliper bracket holes on the crv, but if theyre the same spacing as integras and civic ex/em1/abs then yes to anything larger than dx calipers.

Hondas w/ 5lug are similar, if not identical spacing, so with the crv hubs (if this holds true) one would be able to support wheels from prelude, accord, crv, itr, and a plethora of aftermarket.

Thanks LYNA! I actually try. (But really, I can't take credit for this.)
I need to try to think of something new, now that Ive started to act on my hood latch popper.
Plus, its better than actually thinking about school right now.

GT40FIED · 02-16-2005, 10:33 PM

Man...this used to come up on Mustang forums all the damn time. People would buy big $$$ kits from Baer or SSBC when all you really had to do was steal the fronts off of a Lincoln and then get 2 Ranger passenger side axles (since Rangers have an offset differential and the passenger side axle is the right length) and hardware (or but some 5 lug rotors, calipers, etc. if you wanted). The big plus for Mustangs is wheel selection. Most of the popular styles are 5-lug only. People claim it also adds structural integrity, but I'll let you know when I see a wheel sheer all 4 lugs off in normal (or even hard) driving. So I guess people in both circles waste their money.

02-16-2005, 01:08 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	So today I got a little curious again I have thought about this topic, off and on, ever since it was brought to my attention. Today, I decide to ask your opinion. Why do people spend hundreds, if not close to $1000+ plus on five lug conversions, when it would be just the same to swap the hubs from a crv? Not the knuckle, just the hub. In the rear you'd need to go itr hubs because Im pretty sure crv's never had rear disc. Am I wrong or does that make sense? Going that route, one wouldnt need to redrill rotors to fit nsx/itr calipers on the ex/si/abs/integra knuckle. Now, granted, if one wasnt planning on going 5lug at all, this would be more expensive than just redrilling the rotors. But say if someone wanted the 'bling factor' of it, the increased stability from an added lug, and wanted itr+ calipers...then it makes sense. Tell me why this doesnt work.

02-16-2005, 01:28 PM	#3
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	why do a 5 lug conversion in the first place ? my 4 lugs are just fine the way they are after 172 k miles and lots of abuse. __________________

02-16-2005, 02:23 PM	#5
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	hmm how many ppl do that ? that sounds just like a business idea. sell the hubs, bearings and the studs from honda . btw an you get me a list of all those parts needed ? __________________

02-16-2005, 08:59 PM	#7
MissJDM Registered User Join Date: Aug 2004 Location: West Coast Age: 38 Posts: 2,244	Anybody doing the 5lug conv, would their calipers fit on the CRV? I've never noticed CRV wheels, are they the same five 5lug pattern in specific? PAT you have the cooless, random ideas, dude. __________________ you say it best when you say nothing at all

02-16-2005, 10:33 PM	#9
GT40FIED Best...mod...ever Join Date: Sep 2001 Location: At the end of the longest line Age: 43 Posts: 7,451	Man...this used to come up on Mustang forums all the damn time. People would buy big $$$ kits from Baer or SSBC when all you really had to do was steal the fronts off of a Lincoln and then get 2 Ranger passenger side axles (since Rangers have an offset differential and the passenger side axle is the right length) and hardware (or but some 5 lug rotors, calipers, etc. if you wanted). The big plus for Mustangs is wheel selection. Most of the popular styles are 5-lug only. People claim it also adds structural integrity, but I'll let you know when I see a wheel sheer all 4 lugs off in normal (or even hard) driving. So I guess people in both circles waste their money. __________________ 1984 1/2 Mustang GT350 #842, Faster than you...nuff said Anna Fan Club President/Dictator Someday, in the event that mankind actually figures out what it is that this world actually revoles around, thousands of people are going to be shocked and perplexed that it was not them. Sometimes this includes me. "If you want a vision of the future, imagine a boot stamping on a human face - forever." - George Orwell Welcome to the new Amerika

02-16-2005, 01:20 PM	#2
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	i don't get the whole thing to begin with.

02-16-2005, 01:35 PM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	bigger brakes w/o redrilling "added stability" of an extra lug (I personally find this hard to buy into) Bling factor There are probably other reasons that I cant think of...Its mostly bling

02-16-2005, 02:48 PM	#6
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	that'd be all as far as I can tell... Hubs, studs, and bearings. You could even have a special package that included extened wheel studs.

02-16-2005, 10:03 PM	#8
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Im not sure of the caliper bracket holes on the crv, but if theyre the same spacing as integras and civic ex/em1/abs then yes to anything larger than dx calipers. Hondas w/ 5lug are similar, if not identical spacing, so with the crv hubs (if this holds true) one would be able to support wheels from prelude, accord, crv, itr, and a plethora of aftermarket. Thanks LYNA! I actually try. (But really, I can't take credit for this.) I need to try to think of something new, now that Ive started to act on my hood latch popper. Plus, its better than actually thinking about school right now.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode