.:HSTuners::

02-28-2004, 08:37 PM

Will there be any performance gains if i swap a zc camshaft out of a JDM spec Integra which comes with the 1.6 sohc zc engine non-vtec which puts out 125 ps stock?

02-28-2004, 09:01 PM

i doubt its worth the trouble

*pdiggitydogg* · 02-28-2004, 09:25 PM

zc are dohc so it wont work, no

*AzCivic* · 02-29-2004, 04:21 AM

not all zc's are dohc. i'm not sure if this cam swap would be worth it (or even possible)though, i'll have to do a little research and get back to you.

*pdiggitydogg* · 02-29-2004, 11:24 AM

which one isnt?

could my source be wrong?
http://www.hondaswap.com/forums/inde...howtopic=29825
(at the bottom)

*AzCivic* · 02-29-2004, 02:41 PM

heres a couple of sites that talk about the sohc zc's.

http://asia.vtec.net/specs/daintegra/

http://www.geocities.com/tjautobc/engines_codes.html

*pdiggitydogg* · 02-29-2004, 02:43 PM

hmm...those contradict that of hondaswap

IALuder · 02-29-2004, 10:26 PM

im confused!
any site were you can the sohc zc?

*AzCivic* · 03-01-2004, 03:47 AM

this might help those that are confused: http://www.highaltitudeimports.com/s...ead.php?t=7026

silver · 03-01-2004, 04:52 AM

i put a sohc zc into an ef hatch, so they do exist...and here is where we got it from
http://www.nippon-motors.com/honda.htm

i didn't read azcivic's link about the cam swap, if that's what it's about, but i don't think it'd be enough of a gain to even do it.

*AzCivic* · 03-02-2004, 03:47 PM

yeah i'm thinking its not worth the trouble to put another stock cam in. these people are developing an aftermarket cam for the y7 : http://www.exospeed.com/engine/cams/D16cam.htm

02-28-2004, 08:37 PM	#1
BOLO Posts: n/a	ZC cam in D16y7? Will there be any performance gains if i swap a zc camshaft out of a JDM spec Integra which comes with the 1.6 sohc zc engine non-vtec which puts out 125 ps stock?

02-29-2004, 04:21 AM	#4
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	not all zc's are dohc. i'm not sure if this cam swap would be worth it (or even possible)though, i'll have to do a little research and get back to you. Last edited by AzCivic : 02-29-2004 at 05:24 AM.

02-29-2004, 10:26 PM	#8
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	im confused! any site were you can the sohc zc? __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

03-01-2004, 04:52 AM	#10
silver Registered User Join Date: Dec 2002 Location: so cali again Age: 44 Posts: 820	i put a sohc zc into an ef hatch, so they do exist...and here is where we got it from http://www.nippon-motors.com/honda.htm i didn't read azcivic's link about the cam swap, if that's what it's about, but i don't think it'd be enough of a gain to even do it. __________________ Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-28-2004, 09:01 PM	#2
cashizslick Posts: n/a	i doubt its worth the trouble

02-28-2004, 09:25 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	zc are dohc so it wont work, no

02-29-2004, 11:24 AM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	which one isnt? could my source be wrong? http://www.hondaswap.com/forums/inde...howtopic=29825 (at the bottom)

02-29-2004, 02:41 PM	#6
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	heres a couple of sites that talk about the sohc zc's. http://asia.vtec.net/specs/daintegra/ http://www.geocities.com/tjautobc/engines_codes.html

02-29-2004, 02:43 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	hmm...those contradict that of hondaswap

03-01-2004, 03:47 AM	#9
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	this might help those that are confused: http://www.highaltitudeimports.com/s...ead.php?t=7026

03-02-2004, 03:47 PM	#11
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	yeah i'm thinking its not worth the trouble to put another stock cam in. these people are developing an aftermarket cam for the y7 : http://www.exospeed.com/engine/cams/D16cam.htm