.:HSTuners::

Shaved &/or Laid · 10-08-2003, 09:35 PM

Axle is freed, now how do i get it out of the tranny ? Just pull it really hard ?

*pdiggitydogg* · 10-08-2003, 09:47 PM

no dude...remember? Pry

use a big-ass screwdriver or a breaker bar (theyre small crowbars, if ya dont know)

this pic theyre using a ball-joint splitter (which would work...but Id use the breaker bar)

Shaved &/or Laid · 10-08-2003, 09:52 PM

allllllright. I used a ball joint splitter...ON THE BALL JOINTS lol

but if it works onteh axlessorxx then thats great. Id just rather not be under the car prying as hard as possible with it on jack stands, so i figured pulling REALLY hard might work

*pdiggitydogg* · 10-08-2003, 09:58 PM

no no...see jerking on it you run the risk of the car coming off the stands...and you wouldnt get it off anyways

run (not literally) down your local hardware store and get a pry/breaker bar...they serve lots of purposes...well worth theyre small price)

slide the end in there and pry...not jerk it around...easy. you'll be fine as long as ya dont move around like a maniac

IALuder · 10-08-2003, 10:39 PM

why are you pulling the tranny out? just wondering

Shaved &/or Laid · 10-08-2003, 10:39 PM

hehe yeah we got them around. I call them prybars.

I thought breaker bars are the hugeass ratchet looking ones that i used to get my 32mm's off.

I got my 300lb dad so stand on it. Would that be 300lbs/ft of torque to get that ***** off ? he was about a foot from the bolt when he stood and jumped on it lol.

*pdiggitydogg* · 10-08-2003, 10:48 PM

different area, different names i guess

a ft away? nah that wouldnt work.....3ft should...as long as it doesnt slip off

Shaved &/or Laid · 10-08-2003, 10:51 PM

oh it worked. Dad is ENOURMOUSLY big. Hes proud to contribute

dont think the bolt was happy though. Looks kinda jacked up now

*pdiggitydogg* · 10-08-2003, 11:11 PM

it worked?!
a little unorthodox...but as long as it worked and ya didnt break anything vital...cheers

ebpda9 · 10-09-2003, 07:32 AM

i just pry my axles off. and to take out the 32mm nuts out i use an impact wrench and if that does not work i use a 10ft piece of pipe with my tq wrench.

Shaved &/or Laid · 10-10-2003, 11:00 PM

i gots it off.

i took a Balljoint splitter to that Sum-***** and it was easy as all hell. Deezamn.

Im taking it out cause im mswapping El b16 in. Maximum sexitude.

10-08-2003, 09:35 PM	#1
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	Hubs removed, how to get axle out ? Axle is freed, now how do i get it out of the tranny ? Just pull it really hard ? __________________ Doody Ej1 Yse.

10-08-2003, 09:52 PM	#3
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	allllllright. I used a ball joint splitter...ON THE BALL JOINTS lol but if it works onteh axlessorxx then thats great. Id just rather not be under the car prying as hard as possible with it on jack stands, so i figured pulling REALLY hard might work __________________ Doody Ej1 Yse.

10-08-2003, 10:39 PM	#5
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 39 Posts: 7,908	why are you pulling the tranny out? just wondering __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

10-08-2003, 10:39 PM	#6
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	hehe yeah we got them around. I call them prybars. I thought breaker bars are the hugeass ratchet looking ones that i used to get my 32mm's off. I got my 300lb dad so stand on it. Would that be 300lbs/ft of torque to get that ***** off ? he was about a foot from the bolt when he stood and jumped on it lol. __________________ Doody Ej1 Yse.

10-08-2003, 10:51 PM	#8
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	oh it worked. Dad is ENOURMOUSLY big. Hes proud to contribute dont think the bolt was happy though. Looks kinda jacked up now __________________ Doody Ej1 Yse.

10-08-2003, 09:58 PM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	no no...see jerking on it you run the risk of the car coming off the stands...and you wouldnt get it off anyways run (not literally) down your local hardware store and get a pry/breaker bar...they serve lots of purposes...well worth theyre small price) slide the end in there and pry...not jerk it around...easy. you'll be fine as long as ya dont move around like a maniac

10-08-2003, 10:48 PM	#7
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	different area, different names i guess a ft away? nah that wouldnt work.....3ft should...as long as it doesnt slip off

10-08-2003, 11:11 PM	#9
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	it worked?! a little unorthodox...but as long as it worked and ya didnt break anything vital...cheers

10-09-2003, 07:32 AM	#10
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	i just pry my axles off. and to take out the 32mm nuts out i use an impact wrench and if that does not work i use a 10ft piece of pipe with my tq wrench. __________________

10-10-2003, 11:00 PM	#11
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	i gots it off. i took a Balljoint splitter to that Sum-***** and it was easy as all hell. Deezamn. Im taking it out cause im mswapping El b16 in. Maximum sexitude. __________________ Doody Ej1 Yse.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode