.:HSTuners::

02_Si · 06-27-2003, 12:04 PM

how exactly do you get off the "H" emblem off the trunk so I can put a red one instead of chrome?? Does it come with the adhesive it needs to stick?

*pdiggitydogg* · 06-27-2003, 12:12 PM

I dont know about the newer ones...but...Mine was stuck on with some adhesive on the middle line of the H. AND there are 2 pins that have plastic clips on them on the back.
I used a standard screwdriver w/ a cloth around it and just popped it off...then goo gone, and a good wash before I stuck the new one on

sohc_vtec 2NR · 06-27-2003, 10:21 PM

but doesn't the older ones have 2 holes behind 'em? (99-00)

sohc_vtec 2NR · 06-27-2003, 10:27 PM

i just recently shaved my badges of my car (civic and ex) and here's a small version of the write up i'm gonna make in the future:

1.get goo gone, floss, rag, hair dryer, scraper
2.heat the badge with the hair dryer and have somebody floss between the trunk and the badge...
3.keep "flossin'" until its of and i'm pretty sure there will be a thick layer of adhesive..
4.squirt some goo gone on the adhesive and use the scraper with a rag over it to remove most of the adhesive
5.once there a small amounts of adhesive, squirt more goo gone and rub with the rag..
6.wash away and wax the area!

*pdiggitydogg* · 06-28-2003, 04:25 PM

yeah there are holes behind em...all years 00 and back (ive never messed with the +01s)

the other badges are just held on w/ glue (the Civic and E/L/D/Cx/Si)

06-28-2003, 09:40 PM

thats a good question if the badges on a 01 are held on by more than adhesive because if the h is only being held on by adhesive im removing it!! how do i find out what holds it on before i do it?

06-28-2003, 11:16 PM

dunno if u can see the area by looking through the trunk or not, but on mine (98 LX) u can

*pdiggitydogg* · 06-28-2003, 11:48 PM

you should be able to look up through one of the trunk vent holes...flashlight would help...but im not sure

06-27-2003, 12:04 PM	#1
02_Si 2nd Gear Join Date: Nov 2002 Location: AZ@ Age: 43 Posts: 207	how are you supposed to get this thing off? how exactly do you get off the "H" emblem off the trunk so I can put a red one instead of chrome?? Does it come with the adhesive it needs to stick? __________________ The name is Tom, I am da bomb, if you can't remember, just ask yo' mom.

06-27-2003, 10:21 PM	#3
sohc_vtec 2NR Registered User Join Date: Dec 2002 Location: Kenosha, WI Age: 39 Posts: 1,137	but doesn't the older ones have 2 holes behind 'em? (99-00) __________________ RICE....is good

06-27-2003, 10:27 PM	#4
sohc_vtec 2NR Registered User Join Date: Dec 2002 Location: Kenosha, WI Age: 39 Posts: 1,137	i just recently shaved my badges of my car (civic and ex) and here's a small version of the write up i'm gonna make in the future: 1.get goo gone, floss, rag, hair dryer, scraper 2.heat the badge with the hair dryer and have somebody floss between the trunk and the badge... 3.keep "flossin'" until its of and i'm pretty sure there will be a thick layer of adhesive.. 4.squirt some goo gone on the adhesive and use the scraper with a rag over it to remove most of the adhesive 5.once there a small amounts of adhesive, squirt more goo gone and rub with the rag.. 6.wash away and wax the area! __________________ RICE....is good

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-27-2003, 12:12 PM	#2
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	I dont know about the newer ones...but...Mine was stuck on with some adhesive on the middle line of the H. AND there are 2 pins that have plastic clips on them on the back. I used a standard screwdriver w/ a cloth around it and just popped it off...then goo gone, and a good wash before I stuck the new one on

06-28-2003, 04:25 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	yeah there are holes behind em...all years 00 and back (ive never messed with the +01s) the other badges are just held on w/ glue (the Civic and E/L/D/Cx/Si)

06-28-2003, 09:40 PM	#6
JamieS697 Posts: n/a	thats a good question if the badges on a 01 are held on by more than adhesive because if the h is only being held on by adhesive im removing it!! how do i find out what holds it on before i do it?

06-28-2003, 11:16 PM	#7
DavidH Posts: n/a	dunno if u can see the area by looking through the trunk or not, but on mine (98 LX) u can

06-28-2003, 11:48 PM	#8
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	you should be able to look up through one of the trunk vent holes...flashlight would help...but im not sure