.:HSTuners::

01-13-2003, 01:23 PM

I have two 12" audiobahn alum sounds Q subs dvc 1000 watts max with custom made box for those subs only. and a Power Accoustik Saphire series 1600 watt. Email me if your intereseted asking 700.

Wren57 · 01-15-2003, 09:03 PM

hmm... im a bit audio-illiterate so I need to ask a question- how hard would it be to wire these into my Kenwood KDC-MPV619 mp3 head unit, and what additional parts would be needed for the install... thanks

Wren57 · 01-15-2003, 09:04 PM

ps- if we make a deal, I can take em off ur hands at the Tupelo meet

Wren57 · 01-15-2003, 09:22 PM

Just to clarify- this is whats up for sale, right?

http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=18 796

http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=18 803

correct me if Im wrong, but thats about 550new and shipped...

01-17-2003, 07:25 AM

installation is easy...you could go with an expensive wire kit or a cheep one from walmart...either would work fine......connecting the amp to the Headunit is easy.......you will get a set of RCA jacks with the wire kit.....you plug those into the back of the HU and run them to the amp......then you hook the blue (remote) wire to the blue remote out on the HU...this sends the signal to the amp...run it to the remote connection on the amp and poof thats all done........the rest is easy.....run power through the car from the battery to the distribution block then from there to the amp......then find a good place for a ground like the bottom of the trunk....clean off the paint.....bold the ground wire down then connect the other end to the amp....and poof

01-13-2003, 01:23 PM	#1
Honda530 Posts: n/a	2 12" Audobahn subs, box Power acc amp I have two 12" audiobahn alum sounds Q subs dvc 1000 watts max with custom made box for those subs only. and a Power Accoustik Saphire series 1600 watt. Email me if your intereseted asking 700.

01-15-2003, 09:03 PM	#2
Wren57 Registered User Join Date: Feb 2002 Age: 40 Posts: 2,856	hmm... im a bit audio-illiterate so I need to ask a question- how hard would it be to wire these into my Kenwood KDC-MPV619 mp3 head unit, and what additional parts would be needed for the install... thanks __________________ yeah, its that big

01-15-2003, 09:04 PM	#3
Wren57 Registered User Join Date: Feb 2002 Age: 40 Posts: 2,856	ps- if we make a deal, I can take em off ur hands at the Tupelo meet __________________ yeah, its that big

01-15-2003, 09:22 PM	#4
Wren57 Registered User Join Date: Feb 2002 Age: 40 Posts: 2,856	Just to clarify- this is whats up for sale, right? http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=18 796 http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=18 803 correct me if Im wrong, but thats about 550new and shipped... __________________ yeah, its that big

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-17-2003, 07:25 AM	#5
sc0rch Posts: n/a	installation is easy...you could go with an expensive wire kit or a cheep one from walmart...either would work fine......connecting the amp to the Headunit is easy.......you will get a set of RCA jacks with the wire kit.....you plug those into the back of the HU and run them to the amp......then you hook the blue (remote) wire to the blue remote out on the HU...this sends the signal to the amp...run it to the remote connection on the amp and poof thats all done........the rest is easy.....run power through the car from the battery to the distribution block then from there to the amp......then find a good place for a ground like the bottom of the trunk....clean off the paint.....bold the ground wire down then connect the other end to the amp....and poof