.:HSTuners::

drdingo21 · 10-02-2002, 11:29 PM

i have a 94 ex that i broke when installing the indglo gauges. my question is what other gauge cluster will fit in here? i found some 97 gauge cluster and they look the same up front but will the hook up in the back, thanks!

ShagginJet · 10-03-2002, 02:50 PM

92-95 ONLY

drdingo21 · 10-03-2002, 05:09 PM

thats what i thought :( isn't any year SI will fit also?

ShagginJet · 10-03-2002, 05:21 PM

the 92-95 si should fit, maybe some wire mods that need to be done....

does the current one you have have a tach?

drdingo21 · 10-03-2002, 05:31 PM

yea its an ex manual. everything works except the gas needle wich i broke...

ShagginJet · 10-03-2002, 05:54 PM

ouch, i think you can buy the needles for less the it'd cost to replacethe unit through like ebay. if you broke the actual needle, that should be cheap. if it's the unit with the gas and temp, probably about 75$, the whole used unit is about 150$.

drdingo21 · 10-03-2002, 06:27 PM

well i pulled the needles out instead of just sliding the gauge over it. so the lone meatl rod broke off inside the gas gauge... motor thing

ShagginJet · 10-03-2002, 06:32 PM

You're going ot have to replace that unit peice of the cluster, you can get that from the honda dealership, be ready to pay.

drdingo21 · 10-03-2002, 06:54 PM

bah, ill go to a junkyard and tear that pice out of any gauge cluster i can find

ShagginJet · 10-03-2002, 06:57 PM

good luck, while you're there, if you find a good condition cluster with tach for an 88+, e-mail me, i'll buy it if the price is right

slowEJ6 · 10-04-2002, 02:29 PM

get a new gauge cluster.....$150? i dunno where you shop at, but maybe you should find a new place to purchase your parts.

you can probably pick up a 92-95 gauge cluster for $60 @ a junkyard.

ShagginJet · 10-04-2002, 02:38 PM

That's cause you found it at a junkyard... in LA all the junk yards were tapped out, DRY, had to buy one on ebay. It was a rough number anyways.

ShagginJet · 10-04-2002, 02:38 PM

(hybrid) BTW... I really like your car, sw33t!!

drdingo21 · 10-04-2002, 02:44 PM

no junk yard around here has one eihter...

slowEJ6 · 10-04-2002, 02:52 PM

you can use a 96-00 civic cluster or a 94-01 integra cluster.....just takes some trimming here and there and making custom brackets for it to bolt up - and some rewiring. its a hassle, but it can be done.

10-02-2002, 11:29 PM	#1
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 42 Posts: 1,642	what gauge cluster will fit? i have a 94 ex that i broke when installing the indglo gauges. my question is what other gauge cluster will fit in here? i found some 97 gauge cluster and they look the same up front but will the hook up in the back, thanks!

10-03-2002, 05:21 PM	#4
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	the 92-95 si should fit, maybe some wire mods that need to be done.... does the current one you have have a tach? __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

10-03-2002, 05:54 PM	#6
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	ouch, i think you can buy the needles for less the it'd cost to replacethe unit through like ebay. if you broke the actual needle, that should be cheap. if it's the unit with the gas and temp, probably about 75$, the whole used unit is about 150$. __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

10-03-2002, 06:32 PM	#8
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	You're going ot have to replace that unit peice of the cluster, you can get that from the honda dealership, be ready to pay. __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

10-03-2002, 06:57 PM	#10
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	good luck, while you're there, if you find a good condition cluster with tach for an 88+, e-mail me, i'll buy it if the price is right __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

10-03-2002, 02:50 PM	#2
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	92-95 ONLY

10-03-2002, 05:09 PM	#3
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 42 Posts: 1,642	thats what i thought :( isn't any year SI will fit also?

10-03-2002, 05:31 PM	#5
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 42 Posts: 1,642	yea its an ex manual. everything works except the gas needle wich i broke...

10-03-2002, 06:27 PM	#7
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 42 Posts: 1,642	well i pulled the needles out instead of just sliding the gauge over it. so the lone meatl rod broke off inside the gas gauge... motor thing

10-03-2002, 06:54 PM	#9
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 42 Posts: 1,642	bah, ill go to a junkyard and tear that pice out of any gauge cluster i can find

10-04-2002, 02:29 PM	#11
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 43 Posts: 3,195	get a new gauge cluster.....$150? i dunno where you shop at, but maybe you should find a new place to purchase your parts. you can probably pick up a 92-95 gauge cluster for $60 @ a junkyard.

10-04-2002, 02:38 PM	#12
ShagginJet Registered User Join Date: Jan 2002 Location: Los Angeles Posts: 1,584	That's cause you found it at a junkyard... in LA all the junk yards were tapped out, DRY, had to buy one on ebay. It was a rough number anyways. __________________ RECENTLY UPDATED!!! 5-20-04 http://63.249.135.19/hdrive/car/index.htm

10-04-2002, 02:44 PM	#14
drdingo21 Registered User Join Date: Aug 2002 Location: Elkhart, IN Age: 42 Posts: 1,642	no junk yard around here has one eihter...

10-04-2002, 02:52 PM	#15
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 43 Posts: 3,195	you can use a 96-00 civic cluster or a 94-01 integra cluster.....just takes some trimming here and there and making custom brackets for it to bolt up - and some rewiring. its a hassle, but it can be done.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode