.:HSTuners::

*AzCivic* · 03-18-2002, 06:53 PM

Is the OBX brand short shifter any good?

slowEJ6 · 03-18-2002, 07:01 PM

i dont see why not, i have an APC short shifter and it works just fine

03-19-2002, 02:56 AM

It'll do the same job, the material may be different though

Accord Man · 03-19-2002, 08:41 AM

OBX is respectable.

Racing Rice · 03-19-2002, 01:32 PM

I like mine.. Seem to be pretty decent, I havent had a problem yet.

03-19-2002, 08:11 PM

from my experience OBX is a good quality product so you should go for it

03-22-2002, 12:20 AM

OBX isn't bad at all but you don't need to stick to strictly import names to find good parts my short sifter is made by Hurst it was a little more expensive but Hurst is a very respected name

*AzCivic* · 03-22-2002, 09:26 AM

Thanks everyone, but I decided to go ahead and shell out 90$ for a DC sports short shifter. The reason i went with them is because i read reviews about the cheaper one's and found out they're are prone to breaking, sometimes while just normal driving. I should be installing it today along with some polyurethane bushings. But thanks for your responses! I'd just like to say...This is a great site and the people here a great too!

03-22-2002, 04:33 PM

good choice, but dc's have been known to break also. The only ones that don't break are the ones that got some nice steel in em (solo, C's, B & M)

03-24-2002, 04:41 PM

Quote:

Originally posted by AzCivic
Thanks everyone, but I decided to go ahead and shell out 90$ for a DC sports short shifter. The reason i went with them is because i read reviews about the cheaper one's and found out they're are prone to breaking, sometimes while just normal driving. I should be installing it today along with some polyurethane bushings. But thanks for your responses! I'd just like to say...This is a great site and the people here a great too!

not bad DC sports is the shiit, i love their products

03-24-2002, 06:57 PM

when ya'll talk about breaking where does it break at in the middle, at the bottom?

03-24-2002, 07:25 PM

like right below the shift knob or a little lower, but not at the bottom

03-18-2002, 06:53 PM	#1
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	OBX good or not? Is the OBX brand short shifter any good?

03-19-2002, 08:41 AM	#4
Accord Man THE GENERAL Join Date: Aug 2001 Location: Earth (usually) Age: 43 Posts: 5,698	OBX is respectable. __________________ HondaStyle.com Babysitter's Club Member #0 Soon to be >Dr Max Immuh<

03-19-2002, 01:32 PM	#5
Racing Rice Project Combat Honda Join Date: Sep 2001 Location: Highland,OH Age: 46 Posts: 7,985	I like mine.. Seem to be pretty decent, I havent had a problem yet. __________________ Racing Rice

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-18-2002, 07:01 PM	#2
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 43 Posts: 3,195	i dont see why not, i have an APC short shifter and it works just fine

03-19-2002, 02:56 AM	#3
hondriv Posts: n/a	It'll do the same job, the material may be different though

03-19-2002, 08:11 PM	#6
90civiclxryder Posts: n/a	from my experience OBX is a good quality product so you should go for it

03-22-2002, 12:20 AM	#7
Saint212 Posts: n/a	OBX isn't bad at all but you don't need to stick to strictly import names to find good parts my short sifter is made by Hurst it was a little more expensive but Hurst is a very respected name

03-22-2002, 09:26 AM	#8
AzCivic Moderator Join Date: Feb 2002 Location: Az Age: 44 Posts: 3,804	Thanks everyone, but I decided to go ahead and shell out 90$ for a DC sports short shifter. The reason i went with them is because i read reviews about the cheaper one's and found out they're are prone to breaking, sometimes while just normal driving. I should be installing it today along with some polyurethane bushings. But thanks for your responses! I'd just like to say...This is a great site and the people here a great too!

03-22-2002, 04:33 PM	#9
BrandonClaps Posts: n/a	good choice, but dc's have been known to break also. The only ones that don't break are the ones that got some nice steel in em (solo, C's, B & M)

03-24-2002, 06:57 PM	#11
lx4life Posts: n/a	when ya'll talk about breaking where does it break at in the middle, at the bottom?

03-24-2002, 07:25 PM	#12
BrandonClaps Posts: n/a	like right below the shift knob or a little lower, but not at the bottom