.:HSTuners::

94_AcCoRd_EX · 02-08-2002, 07:50 PM

Hey guys, I'm going to go pick up a torque wrench and spark plug socket to put my Denso iridium plugs in.

What size socket do I need to put in the plugs? I know its a dumb question, but I don't have my service manual with me...

Thanks

ebpda9 · 02-09-2002, 12:51 AM

just get one socket and try it until you can unscrew it, or weasier you could have an old sparkplug that's sitting around. anyway my toolbox has a special socket for plugs. it has to be longer than the others so the end of the plug won't hit the extesion or the ratchet. Why do u need a torque wrench ? 1/4 turn is enough to tighten them plugs.

94_AcCoRd_EX · 02-09-2002, 12:59 AM

I am going to get a socket that is padded and meant for doing plugs. Thanks for the response, but I'd really like to know the size. I think I recall that it was 15mm, but I really can't remember. As for the torque wrench, I like to make sure I don't over or under tighten them, and that does the trick.

94_AcCoRd_EX · 02-09-2002, 12:27 PM

Anyone?

02-10-2002, 05:05 PM

16 mm

94_AcCoRd_EX · 02-10-2002, 05:16 PM

Quote:

Originally posted by SWIFT
16 mm

Thanks a lot!

02-10-2002, 05:19 PM

no prob...

02-08-2002, 07:50 PM	#1
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	Quick Spark Plug Socket Question Hey guys, I'm going to go pick up a torque wrench and spark plug socket to put my Denso iridium plugs in. What size socket do I need to put in the plugs? I know its a dumb question, but I don't have my service manual with me... Thanks __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

02-09-2002, 12:51 AM	#2
ebpda9 Repost Wagon Join Date: Dec 2001 Location: over here Age: 44 Posts: 17,266	just get one socket and try it until you can unscrew it, or weasier you could have an old sparkplug that's sitting around. anyway my toolbox has a special socket for plugs. it has to be longer than the others so the end of the plug won't hit the extesion or the ratchet. Why do u need a torque wrench ? 1/4 turn is enough to tighten them plugs. __________________

02-09-2002, 12:59 AM	#3
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	I am going to get a socket that is padded and meant for doing plugs. Thanks for the response, but I'd really like to know the size. I think I recall that it was 15mm, but I really can't remember. As for the torque wrench, I like to make sure I don't over or under tighten them, and that does the trick. __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

02-09-2002, 12:27 PM	#4
94_AcCoRd_EX Insomniac Moderator Join Date: Aug 2001 Location: OR Age: 44 Posts: 11,142	Anyone? __________________ 1994 Accord EX coupe --Need hosting for your pics on HST? PM me...--

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-10-2002, 05:05 PM	#5
SWIFT Posts: n/a	16 mm

02-10-2002, 05:19 PM	#7
SWIFT Posts: n/a	no prob...