.:HSTuners::

lazerous163 · 02-24-2005, 08:37 PM

how could i swap my h22 for the 3.2 type s? can it be done?
95 2 door

*ChrisCantSkate* · 02-25-2005, 09:00 AM

lots of fabrication. ive never herd of it being done, but im sure with enough money and custom made everything it could be done.

IALuder · 02-25-2005, 06:52 PM

it would be pointless. way to heavy for that car, the H22 is pushing it.

esthirteen · 03-07-2005, 08:31 PM

im sure it could be done too. if they can put an nsx engine in a civic, anything can be done.

strikingaccord · 03-27-2005, 06:15 AM

You'll need custom mounts....check with Hasport. I know they have a kit for a KA20 (RSX) into a DC chassis integra (B18) You'll have to use the RSX axles, which gives you 3 options. 1) get custom axles made to fit your 4 lug hub. (driveshaftshop.com) 2) do a 5 lug conversion (use the v6 accord) in the rear to match the 5 lug you'll then have up front. 3) drive around with 5 lug up front and 4 in the back, meaning you'll have to buy new wheels. You still need to do your homework and take measurements and figure out where you can relocate things like power steering, brake booster, whatever. Good Luck.

ShEaNy · 03-27-2005, 07:55 PM

yea its a pointless...expensive swap...H22 should be good enough?? toss some boost in there...

02-24-2005, 08:37 PM	#1
lazerous163 Parked Join Date: Feb 2005 Location: fl Posts: 13	inline 4 to v6 how could i swap my h22 for the 3.2 type s? can it be done? 95 2 door

02-25-2005, 09:00 AM	#2
ChrisCantSkate Thought Police Join Date: Aug 2001 Location: orlando florida Age: 40 Posts: 9,662	lots of fabrication. ive never herd of it being done, but im sure with enough money and custom made everything it could be done. __________________ Black Vtec Prelude-h22a power'd Many dreams come true, and some have silver linings. I live for my dreams and a pocket full of gold.

02-25-2005, 06:52 PM	#3
IALuder Registered User Join Date: Sep 2003 Location: Des Moines IA Age: 38 Posts: 7,908	it would be pointless. way to heavy for that car, the H22 is pushing it. __________________ 93 Si H23vtec......soon to be 12lbs 95 Civic EX....automatic DD if you cant dazzle them with your brillance, baffle them with your bullshit.

03-07-2005, 08:31 PM	#4
esthirteen Registered User Join Date: Jan 2004 Location: Kenosha, WI Age: 38 Posts: 334	im sure it could be done too. if they can put an nsx engine in a civic, anything can be done. __________________ Goodbye KA24E motor. Have fun in "motor heaven". Fat girls are like scooters...they are fun until your friends see you riding one.

03-27-2005, 06:15 AM	#5
strikingaccord 1st Gear Join Date: Mar 2005 Location: Philadelphia PA Age: 44 Posts: 40	You'll need custom mounts....check with Hasport. I know they have a kit for a KA20 (RSX) into a DC chassis integra (B18) You'll have to use the RSX axles, which gives you 3 options. 1) get custom axles made to fit your 4 lug hub. (driveshaftshop.com) 2) do a 5 lug conversion (use the v6 accord) in the rear to match the 5 lug you'll then have up front. 3) drive around with 5 lug up front and 4 in the back, meaning you'll have to buy new wheels. You still need to do your homework and take measurements and figure out where you can relocate things like power steering, brake booster, whatever. Good Luck. __________________ I must have done a really good job installing these parts. Look at all these bolts I have left over.

03-27-2005, 07:55 PM	#6
ShEaNy Registered User Join Date: Apr 2002 Location: Winnipeg, MB Age: 40 Posts: 3,821	yea its a pointless...expensive swap...H22 should be good enough?? toss some boost in there...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode