.:HSTuners::

03-29-2004, 09:29 AM

As most of you know, i am worthless when it comes to fixing things, so here goes . . .

Ok, i have to repalce my valve cover gasket - do i have to get the valve cover gasket from a 94 Del Sol Vtec or will any DOHC VTEC Bseries one fit?

How can i tell what side is the "passenger side" so i dont put the thing in backwards [again?]. Also, got any tips for screwing the Valve Cover down again (so the washers are even?).

- thanks in advance.

03-29-2004, 10:23 AM

just go to like pepboys and say hey i want a valve cover gasket for, just tell them like a 99 civic si (b/c that car has the b series motor) and that will fit on your car

03-29-2004, 01:19 PM

Quote:

Originally posted by cashizslick

How can i tell what side is the "passenger side" so i dont put the thing in backwards [again?]. Also, got any tips for screwing the Valve Cover down again (so the washers are even?).

- thanks in advance.

And this?

*pdiggitydogg* · 03-29-2004, 01:41 PM

del sol vtec or 99 si will be fine...doesnt matter
Honda part # - 08718-0001 or 08718-0003
(thats what helms says is the part #)

Just torque the bolts down to the right amount of ft/lbs and you'll be fine. - 7.2ft/lbs
The order (when looking at the cover from the front of the car is:
7----------9
---3----1---
---4----2---
8----------6

I believe the gasket should have tabs on one side (outside end) that go on the passenger side of the bay....but I really dont remember too well from the last time I saw one

(be sure to wait 30mins before putting oil in or the liquid gasket will not set right)

03-29-2004, 09:29 AM	#1
cashizslick Posts: n/a	Valve Cover Gasket. As most of you know, i am worthless when it comes to fixing things, so here goes . . . Ok, i have to repalce my valve cover gasket - do i have to get the valve cover gasket from a 94 Del Sol Vtec or will any DOHC VTEC Bseries one fit? How can i tell what side is the "passenger side" so i dont put the thing in backwards [again?]. Also, got any tips for screwing the Valve Cover down again (so the washers are even?). - thanks in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-29-2004, 10:23 AM	#2
Senshi Posts: n/a	just go to like pepboys and say hey i want a valve cover gasket for, just tell them like a 99 civic si (b/c that car has the b series motor) and that will fit on your car

03-29-2004, 01:41 PM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	del sol vtec or 99 si will be fine...doesnt matter Honda part # - 08718-0001 or 08718-0003 (thats what helms says is the part #) Just torque the bolts down to the right amount of ft/lbs and you'll be fine. - 7.2ft/lbs The order (when looking at the cover from the front of the car is: 7----------9 ---3----1--- ---4----2--- 8----------6 I believe the gasket should have tabs on one side (outside end) that go on the passenger side of the bay....but I really dont remember too well from the last time I saw one (be sure to wait 30mins before putting oil in or the liquid gasket will not set right)