.:HSTuners::

*pdiggitydogg* · 01-17-2004, 05:17 PM

True, I could probably find it easily on my own, but this place is super slow and I want some of you guys to do the work for me

Will DC gsr calipers bolt on w/o trouble onto my EK?
Will they clear the 14" winter wheels?
Will I need anything other than the calipers themselves?

Now go....research for me and come back with information!

AkimboStylee · 01-17-2004, 05:29 PM

din't know dc made calipers, yet brake stuff at that.

my guess if the shoe fits wear it(sorry about the pun), if they are bigger you may have a clearence issue.

while your at it check brakelines and stuff, new pads and what not.

im amazed your actually the one asking a question, and we are answering it

*pdiggitydogg* · 01-17-2004, 06:05 PM

no no...not DC the brand, DC integra as in 94-00

I dont have exact specs on the size of the caliper so I am slightly worried about clearence issues - if its just a bit, I'll grind it down...which is the best of the worst case senarios.

I know everything else is fine...This is just a preemptive style question.

And hey, there are still a lot of things I dont know...hang around and you'll see more of that.
Usually, if I dont know, I'll just go and do some reading on my own, but for this one I decided not to, and make a post out of it...since its been so slow lately and questions arent as technical as Id like

Plus this gives the rest of you a chance to search for your own future knowledge

*pdiggitydogg* · 01-17-2004, 08:02 PM

well......nevermind

I couldnt take waiting
so I went and found what I needed.....sorry guys

I need to change to 99- Si or DC teg spindles....which is far too much work for slightly larger calipers IMO

Oh, and it would fit behind the 14"s

Shaved &/or Laid · 01-17-2004, 09:07 PM

lmao. PDiggity youre one of a kind.

now, find out where i can get a bearing

silver · 01-17-2004, 11:17 PM

i wanted to answer it...you suck, i don't go on for like 2 days and i miss out.

AkimboStylee · 01-17-2004, 11:33 PM

yep
dc integra whats that?
i probably know that but it probably slipped my mind

*pdiggitydogg* · 01-17-2004, 11:56 PM

i said what it was
DC integra is 94-00
its just a basic chassis code

AkimboStylee · 01-18-2004, 06:56 PM

i get it

01-17-2004, 05:17 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	Well, I have a question True, I could probably find it easily on my own, but this place is super slow and I want some of you guys to do the work for me Will DC gsr calipers bolt on w/o trouble onto my EK? Will they clear the 14" winter wheels? Will I need anything other than the calipers themselves? Now go....research for me and come back with information!

01-17-2004, 05:29 PM	#2
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 39 Posts: 1,688	din't know dc made calipers, yet brake stuff at that. my guess if the shoe fits wear it(sorry about the pun), if they are bigger you may have a clearence issue. while your at it check brakelines and stuff, new pads and what not. im amazed your actually the one asking a question, and we are answering it __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

01-17-2004, 09:07 PM	#5
Shaved &/or Laid 4th Gear Join Date: Oct 2002 Location: Nashville Age: 38 Posts: 853	lmao. PDiggity youre one of a kind. now, find out where i can get a bearing __________________ Doody Ej1 Yse.

01-17-2004, 11:17 PM	#6
silver Registered User Join Date: Dec 2002 Location: so cali again Age: 44 Posts: 820	i wanted to answer it...you suck, i don't go on for like 2 days and i miss out. __________________ Distributor of proven performance products from top manufacturers such as: Top Secret, Ings+1, J's Racing, Varis, Amuse, ASM, GP Sports, Air Walker, Garage Defend, Kakimoto, BuddyClub, Feel's, Fujitsubo, Porterfield, KG/MM, ORC, Spoon, Mugen, and more than 200 others. If it's in a Hyper Rev, it's in our reach. http://www.bulletproofautomotive.com

01-17-2004, 11:33 PM	#7
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 39 Posts: 1,688	yep dc integra whats that? i probably know that but it probably slipped my mind __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

01-17-2004, 06:05 PM	#3
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	no no...not DC the brand, DC integra as in 94-00 I dont have exact specs on the size of the caliper so I am slightly worried about clearence issues - if its just a bit, I'll grind it down...which is the best of the worst case senarios. I know everything else is fine...This is just a preemptive style question. And hey, there are still a lot of things I dont know...hang around and you'll see more of that. Usually, if I dont know, I'll just go and do some reading on my own, but for this one I decided not to, and make a post out of it...since its been so slow lately and questions arent as technical as Id like Plus this gives the rest of you a chance to search for your own future knowledge

01-17-2004, 08:02 PM	#4
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	well......nevermind I couldnt take waiting so I went and found what I needed.....sorry guys I need to change to 99- Si or DC teg spindles....which is far too much work for slightly larger calipers IMO Oh, and it would fit behind the 14"s

01-17-2004, 11:56 PM	#8
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	i said what it was DC integra is 94-00 its just a basic chassis code

01-18-2004, 06:56 PM	#9
AkimboStylee Registered User Join Date: Aug 2002 Location: The Bay which holds no water, Palm Bay, Fl Age: 39 Posts: 1,688	i get it __________________ A very good quote : " I have many vices in my life, and those keep me from perfection, and not being perfect makes me a human being with morals" -Anonymous

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode