Convert to power

[bent_remy]

Originally posted by yin_immortal
the easiest way to add power locks would be to to go to your local stereo shop and have them install actuators in each door controlled from a remote. If you already have an alarm then they can intergrate the locks onto the remote key pad. Swapping the door and the wiring harness will be difficult because you have to isolate the wires that give power to the door locks, and i am pretty sure the car doesn't come with that capability. we do lots of actuators at my shop and the easiest and lest expensive fix

Well I have a 95 dx with power windows and power door locks and ther are a coupe of ways that you could go about this swap. The easiest way to add power door locks would be to get the actuators, wiring harness and door panels from an 92-95 ex and have them installed at the shop (unless you are familar with wiring). The cheapest way that this can be done is to pick up one of those $50 universal door lock kits on ebay and have that installed. Th eonly problem with that is that you will loose thw factory look of the interior because aftermarket switches will have to be placed on you door panels. You can also have it wired to your alarm as well or as an alternative to cutting holes in your door panels for new stwitches, but that is you want to fumble around with the remote every time you want to open doors. THe same can be done with the windows. I would suggest going with the factory pieces because everything will bolt directly on. Aftermarket kits usuall are not as fast (*windows*) or as reliable as the factory ones are.