.:HSTuners::

01-14-2003, 09:15 AM

Hey guys... need some help here. I've got a 96 Civic EX, and maybe some of you have this same problem...
The headlight covers are really, REALLY dull. Anybody know of a way to get them back to looking new, like, really clear and bright. I've used plastic cleaner, and rubbing compound, after a recommendation from a shop... do these really work? I've seen no big improvement, maybe I'm not patient enough.
Hope you guys have some tips!

slowEJ6 · 01-14-2003, 07:43 PM

get a buffer and polish those babies.....or buy new ones.

01-14-2003, 09:41 PM

now why didn't i think of the buffer

i'll be breaking it out tomorrow
i thought about just buying new ones and starting over, but then again I went through all of the trouble of clearing them myself, i kinda wanted to take the cheap way out.

slowEJ6 · 01-17-2003, 02:25 PM

nothing wrong with the cheap way if it works.

*pdiggitydogg* · 01-17-2003, 03:18 PM

dont keep it on 1 spot too long...it will melt the plastic and warp it

2000Pimpinex · 01-20-2003, 04:25 PM

The buffer works well. I have to use it on the dreeded Mustangs head lights. Did a good job and doesn't cost anything.

02-01-2003, 01:13 PM

scratch remover worked for me

01-14-2003, 09:15 AM	#1
CivicChik96 Posts: n/a	Dull Headlamps Hey guys... need some help here. I've got a 96 Civic EX, and maybe some of you have this same problem... The headlight covers are really, REALLY dull. Anybody know of a way to get them back to looking new, like, really clear and bright. I've used plastic cleaner, and rubbing compound, after a recommendation from a shop... do these really work? I've seen no big improvement, maybe I'm not patient enough. Hope you guys have some tips!

01-20-2003, 04:25 PM	#6
2000Pimpinex Super Moderator Join Date: Sep 2001 Location: Kentucky Age: 44 Posts: 1,427	The buffer works well. I have to use it on the dreeded Mustangs head lights. Did a good job and doesn't cost anything. __________________ 2008 Mustang GT 1998 Hatchback SOLD 1992 Hatchback w/ JDM H22A SOLD 1985 Ford Bronco XLT 5.8 351W w/ 33X12.5X15

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-14-2003, 07:43 PM	#2
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 43 Posts: 3,195	get a buffer and polish those babies.....or buy new ones.

01-14-2003, 09:41 PM	#3
CivicChik96 Posts: n/a	now why didn't i think of the buffer i'll be breaking it out tomorrow i thought about just buying new ones and starting over, but then again I went through all of the trouble of clearing them myself, i kinda wanted to take the cheap way out.

01-17-2003, 02:25 PM	#4
slowEJ6 Registered User Join Date: Nov 2001 Location: Oviedo, FL Age: 43 Posts: 3,195	nothing wrong with the cheap way if it works.

01-17-2003, 03:18 PM	#5
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 42 Posts: 10,579	dont keep it on 1 spot too long...it will melt the plastic and warp it

02-01-2003, 01:13 PM	#7
eviljayr Posts: n/a	scratch remover worked for me