|
Here you go guys. You will need a couple of sharp X-ZACTO blades preferable the ones that are shaped like a chisel. That way you can cut the tops off of the welds. They should then just pop out with a little force.You may need to cut around some of the welds. I don't know how you plan on glue the vinyl so let me know and hopefully I can give you some pointers. I just did my entire interior of my 93 del Sol. The best way to attach it is some small 1/4 inch sheet metal screws and some washers. You may have to built up the washers so you don't screw through the font of the door. There is a dimple in the weld. Start screw them in there working down the door. It will all pull it self flush against each other. Remember take your time the panal cost around$250
|