HSTuners - View Single Post

*pdiggitydogg* · 10-10-2005, 10:52 PM

since the tranny is 36mm and your hubs are 32, it would be custom, unless you can find jdm itr axles (i think theyre tapered like that, maybe not). Usdm itr transmissions are not like this

You need an em1 timing mount and studs, em1 rear T/L bracket, B series front lower tranny mount, b series front lower tq mount (crv p7j or del sol vtec p54 (not p30) if you want A/C. Using the p7j does not allow power steering)

10-10-2005, 10:52 PM	#9
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 40 Posts: 10,579	since the tranny is 36mm and your hubs are 32, it would be custom, unless you can find jdm itr axles (i think theyre tapered like that, maybe not). Usdm itr transmissions are not like this You need an em1 timing mount and studs, em1 rear T/L bracket, B series front lower tranny mount, b series front lower tq mount (crv p7j or del sol vtec p54 (not p30) if you want A/C. Using the p7j does not allow power steering)