|
Lol. Ya your right. Here you go!
-----
Tools Needed
Philips head screw driver (magnetic would be best)
Bulbs used can be any type as long as they are size 194. These bulbs can be purchased at almost any automotive stores such as pep boys, performance car places, Internet, maybe even wal-mart.
Step One:
Take out those 2 screws and remove the "bezel" *lower steering wheel, this may help
Step Two:
Remove These 3 screws.
TIP - don't lose these screws, they are important
Step Three:
Remove Gauge Cluster and but not all the way.
Turn it around and disconnect plugs.
TIP - To save yourself any cutting. Just leave the zip tie on. You can work around it.
Step Four:
Turn those three bulbs a quarter turn and pull it out.
Change the bulbs inside
Put them back in when finished
TIP - Do one at a time. Bulbs are removed by pulling them out, and installed by pushing them in.
Step Five:
Put everything back in and test to see if it works.
NOTE: It won't light up well until it is dark outside
Result:
|