here's my alignment...
front left: front right:
-0.6 Camber -0.9
2.1 Caster 2.1
0.02 Toe -0.01
11.6 SAI 11.7
10.9 included angle 10.7
front cross
camber 0.3
caster 0
SAI -0.1
total toe 0.02
Rear left: Rear right:
-1.7 Camber -2.0
0.12 toe 0.15
Rear cross
total toe 0.27
thrust angle -0.01
axle offset 0 in
It sure looks like shit, but the only measurement here out of spec is the rear right camber which needs to be less than 2* but we know what that's caused from. Plus i'll just shim it. The thing is i remember the rear left squatting before and never thought much of it, and now the drop has accented that. So the question is, wtf is bent...
__________________
|