HSTuners - View Single Post

thermal · 03-13-2006, 06:14 PM

Yes, you have to tap the oil passage on the VTEC head. There is a plugged hole on there that you must run an external oil line for. You also have to use the proper size dowel pin for the internal VTEC oil passage. In other words, get the Golden Eagle VTEC conversion kit. It is worth the $$$. It even comes with the headgasket and precisely machined dowel pin. Plus the external oil line, fittings, and oil filter sandwich adapter.........

If you use a GSR Head with an OEM intake manifold, then you will have to wire the secondary butterfly also.

03-13-2006, 06:14 PM	#5
thermal Banning Machine Join Date: Aug 2001 Location: My Garage, Va. Posts: 5,547	Yes, you have to tap the oil passage on the VTEC head. There is a plugged hole on there that you must run an external oil line for. You also have to use the proper size dowel pin for the internal VTEC oil passage. In other words, get the Golden Eagle VTEC conversion kit. It is worth the $$$. It even comes with the headgasket and precisely machined dowel pin. Plus the external oil line, fittings, and oil filter sandwich adapter......... If you use a GSR Head with an OEM intake manifold, then you will have to wire the secondary butterfly also. __________________ Project Teg Visit the Turbo Forum Last edited by thermal : 03-13-2006 at 06:18 PM.