Quote:
Originally posted by GSteg
to human ear..you cannot tell if it's 2 or 4ohm. simple as that. the difference in distortion is so little that is inaudible.
|
probably not.. I didnt read thru the whole thread..
I thought this was about if there would be a difference or not..
notice that on a good SQ system (with good components, obviously..) theres a good chance you'll hear the difference.. You may not hear the noise, but the reproduction wont be as faitful.
There is a reason for SQ amp builders to make them with a thd of less than 0.003!!!