[ShagginJet]

Try this, you'll probably blow the amp but it'll be fun till your car catches on fire. Instead of running the wires of the subs into independent channels onthe amp, run the amp like you only have one speaker. You should see on the amp where you connect the speaker wires, it'll have the +'s and -'s for normal two chanel and then it should have the -'s and +'s for bridging the amp. So... take the two +'s fromt he subs, and connect them both to the bridge + on the amp, then take the two -'s from the subs and connect them both to the bridge - of the amp. This shows your amp a 1 ohm load which most amps can't handle, it increases the output of the amp by almost 2.5x's and should offer some killer power.

When running amps at 1ohm it's very important to keep them cool. If you don't have an exhaust fan, you should jimmy rig atleast one of them up to cool the amp, this should work.

YOU MAY BLOW THE AMP, BE CAREFULL!!!....

I can always sell you an awesome rockford amp if you blow this one... but you're doing this at your own risk and i accept no resposibility.... have fun.