it's not hard at all. i did it on mine. it's about a 5-7 hrs job
1: loosen the wheels
2: jack up the car
3: remove the wheels
4: pop up the hood and trunk. also remove the rear seat ends.
for the front:
1:remove the brake lines from the strut assembly ( usually 2 screws and the hose will come off.
2: losen the screw from the fork.
4: remove the 3 screws in the engine compartment. at this point in time the shock/ spring assembly should come off.
5: put the spring compressor and apply slight pressure to the spring, so you can remve the nut on top. remove the nut and and dissasemble the thing. easyliy remove tension from the spring(be carefull on this one). assembly is reverse of removal.
for the rear it's the same, but the strut is attached to the rear control arm.
__________________
|