|
in order to put a vtec motor into your car you need to figure out what you want, the most obvious bet would be a b16a3 or a b18c1
the b16a3 comes from a 99-01 civic si
the b18c1 comes from a integra gsr 94+
Now, if you buy these motors you normally get a package which has the tranny,mounts,wires,etc,etc
As for slapping a vtec head on a non-vtec motor
this is very possible you can use the ex motor 1.6 sohc
you have to run a oil feeder line, vtec solenoid, and then wire it up
Make sure the knock sensors and everything else are ok..
some common problems is that its not put back together at the correct specs and oil leaks and stuff, I recomend just getting a swap if you really want to haul butt
|