HSTuners - View Single Post

*pdiggitydogg* · 05-16-2004, 12:20 PM

Spacers that would raise the spring perch on the koni's around .5" in the front and .25" in the rear.

So...
Im going to buy a 10" tube section, and was curious as to whether I should use Aluminum (6061) or Stainless Steel (t304).
The price difference is nearly 2x as much for stainless...but I think it would hold up better....specifically because I plan on making a 1" set for the winter.

What do you guys think?

Oh, the Dimensions of the tube are:
OD - 1.900
ID - 1.610
Wall Diameter - 0.145
Id have to do some enlarging and grind out the lip too.

05-16-2004, 12:20 PM	#1
pdiggitydogg Yahoo Watashi wa kattaze! Join Date: May 2002 Location: Meanwhile, up in The D... Age: 41 Posts: 10,579	So Im going to make some spacers Spacers that would raise the spring perch on the koni's around .5" in the front and .25" in the rear. So... Im going to buy a 10" tube section, and was curious as to whether I should use Aluminum (6061) or Stainless Steel (t304). The price difference is nearly 2x as much for stainless...but I think it would hold up better....specifically because I plan on making a 1" set for the winter. What do you guys think? Oh, the Dimensions of the tube are: OD - 1.900 ID - 1.610 Wall Diameter - 0.145 Id have to do some enlarging and grind out the lip too.