|
jesus i am not trying to be an ass but most of this is wrong..... Mig and "arc" have really nothing in common.....Mig uses wire where as arc uses rods that have to be changed. It is spatter not splatter that is what you do when you crash into a wall at 200 mph. Tig is not stronger. Stick (arc) will be the strongest. Tig is usually for exotic metal (aluminum, stainless steel) stuff like that. Mig can be done on aluminum. Mig is by far the easiest. b16 the picture of the perfect weld was of stick.not mig. Auto drakening hoods are not cheap at all. Co2 and argon do not displace air they simply "protect" the weld from impurities in the air. Also i live very close to michagan come on over ill show you how to stick arc. Mig would be best to use on your frame repair V8 because it is easy,strong,and convient and clean. Please ask any questions i will happily answer them if possible.
__________________
me from another forum (im the top geekz0r)
the geekz0r (11:03:46 PM): basicly, look at it this way...the 6speed is the same is the 5speed in 2,3,4,5,and 6...only the speeds are different because of the fd
the geekz0r (11:04:16 PM): so 2nd pulls like 1st in the 5speed, 3rd is like 2nd, etc.
PortugeeTex (11:04:26 PM): so whats 1st like then?
the geekz0r (11:04:49 PM): 1st is like hitting a cheeta in the ass with a tazer
PortugeeTex (11:04:53 PM): lmfao
|