HSTuners - View Single Post

blind34_1 · 11-18-2003, 02:53 PM

heres the parts youll need, i have a howto, but its too big to attach:

Parts
*You may not need everything but it's good to have!
90-93 Integra Rear Trailing Arms (with everything attached Rotor, Caliper, Ebrake Cables...)
or
90-91 CRX Rear Trailing Arms (with same...)
You can use either trailing arm but for CRX you need CRX ebrake cables and for Civic you need Integra ebrake cables (might as well get whole CRX trailing arm + cables for CRX, and whole Integra trailing arm + cables for Civic)
90-93 Integra "4040" Brake Proportioning Valve (Prop Valve), HIGHLY RECOMMENDED!!!
New Rotors or resurface old ones (I used new Brembo Blanks)
Reman. Calipers (if your old ones are in bad condition)
Stainless Steel Braided Brake Lines (recommended... I used Goodridges)
New Brake Fluid (I used Castrol GTLMA DOT4)
Brake Pads (I use OEM Honda/Nissin pads)

11-18-2003, 02:53 PM	#7
blind34_1 Registered User Join Date: May 2002 Location: IL Age: 40 Posts: 1,813	heres the parts youll need, i have a howto, but its too big to attach: Parts *You may not need everything but it's good to have! 90-93 Integra Rear Trailing Arms (with everything attached Rotor, Caliper, Ebrake Cables...) or 90-91 CRX Rear Trailing Arms (with same...) You can use either trailing arm but for CRX you need CRX ebrake cables and for Civic you need Integra ebrake cables (might as well get whole CRX trailing arm + cables for CRX, and whole Integra trailing arm + cables for Civic) 90-93 Integra "4040" Brake Proportioning Valve (Prop Valve), HIGHLY RECOMMENDED!!! New Rotors or resurface old ones (I used new Brembo Blanks) Reman. Calipers (if your old ones are in bad condition) Stainless Steel Braided Brake Lines (recommended... I used Goodridges) New Brake Fluid (I used Castrol GTLMA DOT4) Brake Pads (I use OEM Honda/Nissin pads)