HSTuners - View Single Post

nonovurbizniz · 07-03-2003, 03:08 PM

everything below the box...

You have to take off the bumper... there's a screw mounting it to the fender on either side and then the strip of screws under the hood....

then you pull out that big black box that sits under the bumper on the passenger side... then you can take out the stock box and drill holes in it (JUST THE BOTTOM) DO NOT drill holes on the top side of the box that fits over the filter...

there are a couple of bolts holding that black box in so be patient and don't just yank hard.

the snorkle leads into the box (which is the baffleing) it's all one piece...

good luck.

If you're desperate I can take pics but that won't be till the end of the weekend.

07-03-2003, 03:08 PM	#4
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 48 Posts: 2,693	everything below the box... You have to take off the bumper... there's a screw mounting it to the fender on either side and then the strip of screws under the hood.... then you pull out that big black box that sits under the bumper on the passenger side... then you can take out the stock box and drill holes in it (JUST THE BOTTOM) DO NOT drill holes on the top side of the box that fits over the filter... there are a couple of bolts holding that black box in so be patient and don't just yank hard. the snorkle leads into the box (which is the baffleing) it's all one piece... good luck. If you're desperate I can take pics but that won't be till the end of the weekend. __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...